Barnett, M.R., Keshavarz, Z. & Ma, X., "A Semianalytical Sachs Model for the Flow Stress of a Magnesium Alloy", Metallurgical and Materials Transactions A, 37A, 2283-2293, 2006.

Barnett, M.R. & Beer, A.G., "A Criterion for Conventional Dynamic Recrystallization: Application to Magnesium Alloys", Manchester conference (FJH Symposium) to be published later this year.

Barnett, M.R., "A Practical Condition for Migration DRX", accepted to Acta Materialia with minor revision.

Barnett, M.R., "Twinning and Ductile Failure of Mg-3Al-1Zn", Magnesium Technology (TMS), 2007.

Barnett, M.R., “Ductility of Magnesium AZ31: Twinning when the c-axis is compressed”, in Proc. 7th International Conference on Magnesium Alloys and Their Applications, ed. K.U. Kainer, Wiley-VCH, Weinheim, p 571, 2007.

Beladi, H. & Barnett, M.R., "Influence of Aging Pre-Treatment on the Compressive Deformation of WE54 Alloy", accepted to Materials Science and Engineering A.

Blake, A. & Caceres, C.H., "Solid solution hardening and softening in Mg-Zn alloys", Materials Science and Engineering, in press, 2007.

Bourgeois, L, Wong, T., Xiong, X.F., Nie, J.F. & Muddle, B.C., "Interactions Between Cu and Sn in the Early Stages of Ageing of Al-1.7at.%Cu-0.01at.%Sn", Mater. Sci. Forum, 519-21, pp. 495-500, 2006.

Burhan, N. & Ferry, M., "Changes to grain size distribution of a submicron grained Al-Sc alloy during high temperature annealing", Materials Science Forum, 519-521, p.1617, 2006.

Caceres, C.H., "Economical and environmental factors in light alloys automotive applications", Metallurgical and Materials Transactions, in press, 2007.

Caceres,C. H. & Blake, A., "On the Strain Hardening Behaviour of Magnesium at Room Temperature", Materials Science and Engineering, in press, 2007.

Caceres, C.H., Blake, A. & Lukac, P., "Single-Crystal and Polycrystal Effects on the Strain-Hardening Behaviour of Pure Magnesium", Acta Materialia, submitted, 2007.

Chen, G. & Ferry, M., "Crystallization-induced surface relief effects in Mg60Cu30Y10 bulk metallic glass", Journal of Materials Science (DOI: 10.1007/s10853-006-1140-2), 2006.

Chen, G. & Ferry, M., "Crystallization of Mg-base metallic glass", Transactions of the Non-Ferrous Metals Society of China, 16, pp.833-837, 2006.

Chen, G. & Ferry, M.. "Some aspects of the fracture behaviour of Mg65Cu25Y10 bulk metallic glass during room-temperature bending", Journal of Materials Science, 41, pp.2843-2648, 2006.

Ferry, M. & Burhan, N., "Structural aspects of grain coarsening in an ultra-fine grain Al-Sc alloy", Acta Materialia (submitted).

Ferry, M. & Burhan, N., "Microstructural evolution in a fine-grained Al-0.3Sc alloy produced by severe plastic deformation", Scripta Materialia (in press).

Ferry, M. & Burhan, N., "Statistical aspects of grain coarsening in a fine-grained Al-Sc alloy", Materials Science Forum (in press).

Gable, B.M. & Muddle B.C., "Factors Influencing the Nucleation of Θ in Al-Cu-In Alloys", Mater. Sci. Forum, 519-21, pp. 585-90, 2006.

Gao, X., He, S.M., Zeng, X.Q., Peng, W.J., Ding & Nie, J.F., "Microstructure evolution in a Mg-15Gd-0.5Zr (wt.%) alloy during isothermal aging at 250°C", Materials Science and Engineering A, 431, 322-327, 2006.

Goh, S.L., Nie, J.F., Bourgeois, L., Muddle B.C. & Embury, J.D., "Improved Multiple Ageing Treatments for AA6111", Mater. Sci. Forum, 519-21, pp. 1499-1504, 2006.

Gourlay, C.M. & Dahle, A.K., "Dilatant shear bands in solidifying metals", Nature, 445, pp. 70-73, 2007.

Gun, B., Laws, K.J. & Ferry, M., "High temperature mechanical behaviour of Mg-based BMGs produced by low-pressure die-casting", Materials Science & Engineering A (in press).

Gun. B., Laws, K.J. & Ferry, M., "Superplastic flow of a Mg-based bulk metallic glass in the supercooled liquid region", Journal of Non-Crystalline Solids, 352, pp.3896-3902, 2006.

Gun. B., Laws, K.J. & Ferry, M., "Static and dynamic crystallization in Mg65Cu25Y10 bulk metallic glass", Journal of Non-Crystalline Solids, 352, pp.3887-3895, 2006.

He, S.M., Zeng, X.Q., Peng, L.M., Gao, X., Nie, J.F. & Ding, W.J., "Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy", Journal of Alloys and Compounds, 427, 316-323, 2007.

He, S.M., Zeng, X.Q., Peng, L.M., Gao, X., Nie, J.F. & Ding, W.J., "Precipitation in a Mg-10Gd-3Y-0.4Zr (wt.%) alloy during isothermal ageing at 250°C", Journal of Alloys and Compounds, 421, 309-313, 2006.

Hutchinson, C. R., Goune, M. & Redjaimia, A., "Selecting Non-Isothermal Heat Treatment Schedules for Precipitation Hardening Systems: An Example of Coupled Process-Property Design", Acta Materialia, 55, pp. 213-223, 2007.

Hutchinson, C. R., Cornall P. & Goune, M.,"On the Origin of the Enhanced Creep Resistance in Underaged Al-Cu Based Alloys", Materials Science Forum, 519-521, pp. 1029-1034, 2006.

Keshavarz, Z. & Barnett, M.R., "Slip During Tension Testing of Mg-3Al-1Zn Sheet", in Proc. 7th International Conference on Magnesium Alloys and Their Applications, ed K.U. Kainer, Wiley-VCH, Weinheim, p 588, 2007.

Keshavarz, Z. & Barnett, M.R., "EBSD analysis of deformation modes in Mg-3Al-1Zn", Scripta Materialia, 55, 915-918, 2006.

Kratzer,T., Gable, B.M., Nairn, K.M., Bastow, T.J., Muddle, B.C.& Hill, A..J., "The Effect of Alloying Additions on Vacancy Behaviour in Aluminium-Copper Alloys", Mater. Sci. Forum, 519-21, pp. 597-602, 2006.

Kubota,M., Nie, J.F. & Muddle, B.C., "Identification of Quasicrystalline Particles in an Isothermally Aged Al-10Mg-0.05Ag Alloy", Mater. Sci. Forum, 519-21, pp. 561-6, 2006.

Laws, K.J., Gun, B & Ferry, M., "Effect of die-casting parameters on the production of high quality Mg-base bulk metallic glass samples", Materials Science & Engineering A, 425, pp.114-120, 2006.

Liddicoat, P. V., Honma, T., Stephenson, L. T. & Ringer, S. P., "Evolution of Nanostructure During the Early Stages of Ageing in Al-Zn-Mg-Cu Alloys", Materials Science Forum, 519-521, pp555-560, 2006.

Liu, H., Mi, W. B., Li, Z. Q. , Zhang, D. X., Wang, Y. X., Bai, H. L., Zheng, R. K. & Ringer, S. P., "Antiferromagnetic-coupling-induced magnetoresistance enhancement in Fex(TiO2)1-x films", to be published in Ultramicroscopy.

Lynch, S.P., Moutsos, S., Gable, B.M., Knight, S., Edwards, D.P. & Muddle, B.C., "Effects of Structure and Bonding at Surfaces and Interfaces on Fracture", 16th European Conference of Fracture – Failure Analysis of Nano and Engineering Materials and Structures (ECF-16), Alexandroupolis, Greece, July 2006.

Ma, X. & Barnett, M.R., "Influences of Steady and Cyclic Die Rotation on the Compression of Aluminium" presented to ICSMA and should be published in the special issue of Materials Science and Engineering A., 2007.

Marceau, R.K.W., Ferragut, R., Dupasquier, A., Iglesias, M.M. & Ringer, S.P., "Vacancy-Solute Interactions in Al-Cu-Mg", Materials Science Forum, 519-521, p. 197-202, 2006.

Mendis, C., Bettles, C. J., Gibson, M.A. & Hutchinson, C. R., "An Enhanced Age Hardening Response in Mg-Sn Based Alloys Containing Zn", Materials Science & Eng. A., 435-436, pp. 163-171, 2006.

Mendis, C., Bettles, C. J., Gibson, M.A., Gorsse, S. & Hutchinson, C. R., "The Refinement of Precipitate Distributions in a Mg-Sn Alloy Through Microalloying", Philosophical Magazine Letters, 86, pp. 443-456, 2006.

Mendis, C., Bettles, C. J., Gibson, M.A., Gorsse, S. & Hutchinson, C. R., "The Refinement of Precipitate Distributions in a Mg-Sn Alloy Through Microalloying", in Proceedings of the 7th International Conference on Magnesium Alloys, Ed. K. U. Kainer, Wiley-VCH, pp.480-485, 2006.

Mendis, C.L., Muddle, B.C. & Nie, J.F.,"Characterisation of Intermetallic Particles in a Mg-8Zn-4Al-0.5Ca (wt %) Casting Alloy", Philos. Mag. Letters, 86 (12), pp. 755-62, 2006.

Moody, M. P., Stephenson, L. T., Liddicoat, P.V. & Ringer, S. P., "Contingency Table Techniques for Three Dimensional Atom Probe Tomography", to be published in Microscopy Research and Technique.

Morniroli, J.P., Marceau, R.K.W., Ringer, S.P. & Boulanger, L., "LACBED Characterisation of Small Dislocation Loops", Philosophical Magazine, 86, p. 4883-4900, 2006.

Morniroli, J.P., Marceau, R.K.W. & Ringer, S.P., "New Developments in the characterization of dislocation loops from LACBED patterns", Journal of Microscopy, 233 Pt 3, p. 246-248, 2006.

Muddle, B.C., Nie, J.F. & Hutchinson, C.R., "Multiscale Structural Design and Processing for Increased Strength in Aluminium Alloys", in Simulation of Aluminium Shape Casting Processing: From Alloy Design to Mechanical Properties (Qigui Wang, Matthew J.M. Crane and Peter D. Lee, eds), TMS (The Minerals, Metals and Materials Society), Warrendale, PA, pp. 3-12, 2006.

Muddle, B.C. & Nie, J.F., "Nucleation-mediated Structural Refinement and Aluminium Alloy Design", Mater. Sci. Forum, 519-21, pp. 191-6, 2006.

Nairn, K.M., Gable, B.M., Stark, R., Ciccosillo, N., Hill, A.J., Muddle, B.C. & Bastow, T.J., "Monitoring the Evolution of the Matrix Copper Composition in Age Hardenable Al-Cu Alloys", Mater. Sci. Forum, 519-21, pp. 591-6, 2006.

Nie, J.F. & Muddle, B.C., "An Alternative Approach to the Crystallography of Martensitic Transformations in ZrO2", Mater. Sci Eng. A., 438-440A, pp. 343-5, 2006.

Nikulin, A.Y., Dilanian, R.A., Gable, B.M. & Muddle, B.C., "3-D X-ray Diffraction Imaging at the Nanoscale", 2006 International Conference On Nanoscience and Nanotechnology (ICCON2006), Brisbane, Australia, July 2006.

Nogita, K., Yasuda, H., Yoshida, K., Uesugi, K., Takeuchi, A., Suzuki, Y. & Dahle, A. K., "Determination of strontium segregation in modified hypoeutectic Al-Si alloy by micro x-ray fluorescence analysis", Scripta Materialia, 55, pp. 797-790, 2006.

Quadir, M.Z., Al-Buhamad, O. & Ferry, M., "Processing of multi-layered Al-Al(Sc) hybrid sheet by accumulative roll bonding", Materials Science Forum (in press).

Saxey, D. W., Apperley, M., Zheng, R. K., Honma, T. & Ringer, S. P., "Nanostructural Analysis of Materials", Materials Forum (Australia), 30, pp85-89, 2006.

Saxey, D. W., Cairney, J. M., McGrouther, D., Honma, T. & Ringer, S. P., “Atom Probe Specimen Fabrication Methods Using a Dual FIB/SEM”, to be published in Ultramicroscopy.

Su, Y., Gable, B.M., Muddle, B.C. & Nie, J.F., "Secondary Precipitation in the Magnesium Alloy WE54", 7th International Conference on Mg Alloys, Dresden, Germany, November 2006.

Su, Y., Gable, B.M., Muddle, B.C. & Nie, J.F., "Secondary Precipitation in the Magnesium Alloy WE54", Proc. 7th Int. Conf. Magnesium Alloys and Their Applications, ed. K.U. Kainer, Wiley-VCH, Weinheim, pp. 447-452, 2006.

Swamy, V., Kuznetsov, A., Dubrovinsky, L.S., Macmillan, P.F., Prakapenka, V.B., Shen, G. & Muddle, B.C., "Size-Dependent Pressure-Induced Amorphization in Nanoscale TiO2", Phys. Rev. Lett., 96, pp. 135702-(1-4), 2006.

Swamy, V., Menzies, D., Muddle, B.C., Kuznetsov, A., Dubrovinsky, L.S., Dai, Q.& Dmitriev, V., "Nonlinear Size Dependence of Anatase TiO2 Lattice Parameters", Appl. Phys. Lett., 88, pp. 243103-(1-3), 2006.

Swamy,V., Muddle, B.C. & Dai, Q., "Size-dependent Modifications of the Raman Spectrum of Rutile TiO2", Appl. Phys. Lett., 89, pp. 163118-(1-3), 2006.

Trojanova, Z. & Caceres, C.H., "On the strain to the onset of serrated flow in AZ91 alloy". Scripta Materialia, 56, 793-796, 2007.

Wen, C., Barnett, M., Vella, J. & Yamada, Y., "Solid-state Foaming of Magnesium Alloys, Porous Metals and Metal Foaming Technology", The Japan Institute of Metals, Japan pp. 165-168, 2006.

Zhu, S.M., Mordike, B.L. & Nie, J.F., "Creep and Rupture Properties of a Squeeze-Cast Mg-Al-Ca Alloy", Metall. Mater. Trans. A., 37A, pp. 1221-1229, 2006.

Zhu, S.M., Mordike, B.L. & Nie, J.F., "Comparison of Creep Properties of a Mg-Al-Ca Alloy Produced by Different Casting Technologies", Mater. Sci. Eng. A., in press, 2006.