Ahmed A., Neely A.J., Shankar K.K. & Chan S.L.I., ‘Tensile Behaviour of Nano-Particulate Reinforced Aluminium Matrix Composites at Elevated Temperatures’, Materials Science Forum, Vol 561-565, 761-764, 2007.

Bettles, C., Lapovok, R., Ng, H.P., Tomus, D. & Muddle, B.C., ‘Approaches to the Design and Processing of Novel Titanium Alloys’, Advanced Materials Research, Materials Science Forum, 29/30, 127-130, 2007.

Caceres, C.H. & Blake, A., ‘Solute and temperature effects on the strain hardening behaviour of Mg-Zn solid solutions’, in International Conference on Materials Structure and Micromechanics of Fracture (Invited), Brno, Czech republic, June 26-29, 2007.

da Costa Teixeira, J., Bourgeois, L., Sinclair, C.W. & Hutchinson, C.R., ‘Experimental Investigation of Isotropic and Kinematic Hardening in Al-3Cu-0.05Sn (wt. %)’, 6th Pacific Rim International Conference on Advanced Materials and Processing (Materials Science Forum), 561-565, 1849-1852, 2007).

da Costa Teixeira, J., Bourgeois, L. & Hutchinson, C.R., ‘A Study of the Microstructural Evolution and Strengthening Effects of Non-Spherical Precipitates in an Al-Cu Alloys’, 6th Pacific Rim International Conference on Advanced Materials and Processing (Materials Science Forum), 561-565, 2317-2320, 2007).

Dahle, A.K., Nogita, K., Lu, L. & McDonald, S.D., ‘Engineering eutectic solidification in Al-Si alloys’, Proceedings of Solidification Processing 07, Sheffield UK, July (2007) p. 196-200.

Davies, C.H.J., ‘The effect of twinning on strain rate sensitivity during the compression of extruded magnesium alloy AZ31’, Proc Thermec 06, Materials Science Forum, Vols. 539-543, (2007) pp 1723-1728.

Davies, C.H.J., Cao, W.Q., Gu C.F., Lapovok, R. & Pereloma, E.V., ‘Texture and Boundary Characteristics of Severely Deformed and Recrystallised Copper’, Recrystallization and Grain Growth III, Materials Science Forum, 558/559, 177-182, 2007.

Estrin, Y. & Muddle, B., ‘Bulk Nanomaterials for structural applications’, 3rd Shanghai International Nanotechnology Cooperation Symposium, Shanghai, China, 21-23 November 2007, pp. 98-111.

Ferry, M. & Burhan, N., ‘Statistical aspects of grain coarsening in a fine-grained Al-Sc alloy’, Proceedings of 3rd Conference on Recrystallization and Grain Growth, 10-15 June, 2007, Jeju Island, Korea, Materials Science Forum, 558-559, pp.729-734, 2007.

Fu, P.H., Peng, L.M., Jiang, H.Y., Zhai, C.Q., Gao, X. & Nie, J.F., ‘Zr-Containing Precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr Alloy during Solution Treatment at 540°C’, Materials Science Forum, 546-549, 97-100, 2007.

Gourlay, C.M., Meylan, B. & Dahle, A.K., ‘Rheological Transitions at Low Solid Fraction during Equiaxed Dendritic Solidification’, Materials Science Forum, 561-565, 1067-1070, 2007.

Gourlay, C.M. & Dahle, A.K., ‘Dilatancy and strain localization in equiaxed solidifying alloys.’in Proceedings of the 5th Decennial International Conference on Solidification Processing (SP07), Sheffield, UK. 2007.

Holloway, L.J. & Birbilis, N., ‘Is Cathodic Protection the Green Option?’, Proc. Conf. Corrosion and Prevention ’07, Sydney, Australia, 2007.

Idris, M.I., Vodenitcharova, T. & Hoffman, M., ‘Resistance of thin Al foam panels to deep indentation’, Materials Science Forum, Vols 561-565 (2007) pp. 357-360.

Kanta, A., Abbott, T. & Muddle, B., ‘Modification of Surface Behaviour of Magnesium by Beryllium Alloying’, 1st International Conference - Corrosion and Material Protection, Prague, Czech Republic, 1-4 October 2007.

Kolyvanov, E.L., Kobelev, N.P. & Estrin, Y., ‘Relaxation processes in Nanocrystalline Copper Produced by Equal Channel Angular Pressing’, Third Intl. School on Physical Metallurgy: Nanomaterials for Technological and Medical Applications, 24-28 September 2007, Samara, Togliatti, Ulyanovsk and Kazan’, Ed. A.A. Vikarchuk, Togliatti University Press, pp. 85-88. (in Russian).

Kong, L., She, F., Gao, W., Nahavandi, S. & Hodgson, P., ‘Integrated Optimization System for High Pressure Die Casting Processes’, in Yong-Taek Im (ed.), Proceedings of the 10th International Conference on Advances in Materials and Processing Technologies AMPT2007, pp. 1483-1493, Korea Advanced Institute of Science and Technology, Korea.

Lapovok, R., Tomus D. & Muddle, B.C., ‘Compaction of Ti-6Al-4V Powder by ECAE with Back-Pressure’, Advanced Materials Research, Materials Science Forum, 29/30, 33-36 2007.

Laws, K.J., Gun. B. & Ferry, M., ‘The production and elevated temperature properties of Ca65Mg15Zn20 bulk metallic glass’, PRICM-6 conference, 6-9 November, 2007, Jeju Island, Korea, Materials Science Forum, 561-565, pp.1263-1266, 2007.

Muddle, B.C. & Hutchinson, C.R., ‘A Design-directed Approach to Research Prioritization in the Light Alloys’, in Frontiers in the Design of Materials, (B. Raj et al., eds), Univ. Press (India) Private Ltd (CRC Press LLC), Hyderabad, pp. 49-58, 2007.

Muddle, B.C., Swamy, V. & Estrin, Y., ‘Design of Nanostructure for Exceptional Mechanical Properties’, Third Shanghai International Nanotechnology Cooperation Symposium (SINCS 2007), 2007.

Nagasekhar, A.V., Caceres, C.H. & Easton, M., ‘Microstructure development and mechanical behavior in high pressure die cast magnesium-aluminium binary alloys’ (accepted), Proceedings of Magnesium Technology 2008, TMS Annual Meetings, 9-13th March 2008, New Orleans, USA.

Nagasekhar, A.V. & Caceres, C.H., ‘Solute content and the tensile behavior of high pressure die cast Mg-Al alloys’ PRICM-6, 5-9 Nov 2007, Jeju Island, South Korea, Materials Science Forum, 561-565, 2007, 333-336.

Nogita, K. & Dahle, A. K., ‘New approaches to understanding modification and nucleation mechanisms in hypoeutectic Al-Si alloys’, Proc. of TMS Annual Meeting, Orlando, USA, 25th Feb to 1st Mar, (2007) p. 112. (Light Metals Proceedings in CD).

Pled, F., Yan, W. & Wen, C., ‘Crushing Modes of Alumunum Tubes Under Axial Compression’, in Faris Albermani, Bill Daniel, John Griffiths, Doug Hargreaves, Ross McAree, Paul Meehan, Andy Tan, Martin Veidt (eds), Proceedings of the Fifth Congress Australasian Congress on Applied Mechanics, pp. 178-183, Engineers Australia, Australia.

Quadir, M.Z., Bassman, L., Al-Buhamad, O. & Ferry, M., ‘Formation of recrystallized and recovered multilayered microstructure in a hybrid aluminium alloy’, PRICM-6 conference, 6-9 November, 2007, Jeju Island, Korea, Materials Science Forum, 561-565, pp.131-134, 2007.

Quadir, M.Z., Al-Buhamad, O. & Ferry, M., ‘Processing of multi-layered Al-Al(Sc) hybrid sheet by accumulative roll bonding’. Proceedings of 3rd Conference on Recrystallization and Grain Growth, 10-15 June, 2007, Jeju Island, Korea, Materials Science Forum, 558-559, pp.307-312, 2007.

Robertson, I.M., Low, R.J. & Schaffer, G.B., ‘Economical Sintering of Titanium Powder’, 11th World Conference on Titanium, Kyoto, Japan, June 2007.

Sudholz, A.D., Birbilis, N., Bettles, C.J. & Gibson, M.A., ‘Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions’, Proceedings of Corrosion and Prevention ’07, Sydney, Australia, 2007.

Swamy, V. & Muddle, B.C., ‘Ultrastiff Cubic TiO2 Identified via First-Principles Calculations.’ Physical Review Letters, 98, 035502, 2007.

Wen, C., Yamada, Y., Nouri, A. & Hodgson, P., ‘Porous Titanium with Porosity Gradients for Biomedical Applications’, Materials Science Forum, Vols 539-543, pp. 720-725, Trans Tech Publications, Switzerland.

Weng W. X., Li C. Y. V., Wang Z. M. and Chan S. L. I., ‘Self-discharge Behaviour of MmNi5-based Hydrogen Storage Electrodes in Different Electrolytes’, International Conference on Materials for Advanced Technologies, Singapore, July 2007.

Xia, K., ‘Bulk Ultrafine and Nanostructured Materials from Consolidation of Particles by Severe Plastic Deformation,’ Materials Science Forum, in press.

Xiong, J., Li, Y., Yamada, Y., Hodgson, P. & Wen, C., ‘Processing and Mechanical Properties of PorousTitanium-Niobium Shape Memory Alloy for Biomedical Applications’, Materials Science Forum, Vol 561-565, pp. 1689-1692, Trans Tech Publications, Switzerland

Yamada, Y., Li, Y., Banno, T., Xie, Z. & Wen, C., ‘Micro-porous Nickel Produced by Powder Metallurgy’, Materials Science Forum, 534-536, pp. 977-980, 2007.

Yamada, Y., Banno, T., Xie, Z., Li, Y. & Wen, C., ‘Preparation and Characterisation of Open-Cell Microporous Nickel’, Materials Science Forum, 539-543, pp. 1833-1838, 2007.

Yang, C., Hodgson, P., Liu, Q. & Ye, L., ‘Geometrical Effects on Residual Stresses in 7050-T7451 Aluminium Alloy Rods Subject to Laser Shock Peening’, in AMPT (ed.), The 10th International Conference on Advances in Materials and Processing Technologies, pp. 709-718, National Research Laboratory for Computer Aided Materials Processing, Korea.

Zhang, J., Chang, X. & Xia, K., ‘Effects of Intensive Forging and Gd Addition on Microstructure Homogeneity in Wrought TiAl,’ Proceedings of the 11th World Conference on Titanium, in press.

Zhu, Y.M., Morton, A.J. & Nie, J.F., ‘Characterisation of Intermetallic Phases and Planar Defects in Mg-Y-Zn Alloys’, Materials Science Forum, 561-565, 151-4, 2007.

Atrens, A., Plenary/keynote on ‘Magnesium stress corrosion cracking’ to 3rd International Conference on Environmental Degradation of Engineering Materials, Jastrzebia Gora, Poland, 2007.

Atrens, A., Invited presentation from international distinguished researcher on ‘Stress Corrosion Cracking of Magnesium Alloys’ to the 1st Shanghai international workshop on Advanced Magnesium Alloys and Their Applications, Aug. 1-4, 2007, Shanghai, China, organized by Shanghai Jiaotong University and the Science and Technology Commission of Shanghai Municipality.

Barnett, M., ‘Ductile Failure of Magnesium AZ31: Twinning when the c-axis is Compressed,’ in Karl U. Kainer (ed.), Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, pp. 571-574, Wiley-VCH Verlag, Germany.

Keshavarz, Z. & Barnett, M., ‘Slip During Tension Testing of Mg-3A1-1Zn Sheet,’ in Karl U. Kainer (ed.), Proceedings of the 7th International Conference on Magnesium Alloys and Their Applications, pp. 588-593, Wiley-VCH Verlag, Germany.

Birbilis, N., ‘Magnesium Corrosion: the effect of Rare Earth and atypical alloying additions,’ Proceedings of the 16th International Federation for Heat Treatment and Surface Engineering (IFHTSE) Conference, Brisbane, Australia. Nov.2007. IMEA.

Birbilis, N., ‘High-resolution electrochemical and microscopic characterization of localized corrosion of light alloys: Possibilities and ramifications’, Proceedings of the 58th Annual meeting of the International Society of Electrochemistry, Banff, Canada. September 2007. ISE.

Kang Y.C. & Chan S.L.I., ‘High-Temperature Nanometric Particulate Reinforced Aluminium Matrix Composites for use in Joint Strike Fighter’, Australian JSF Advanced Technology and Innovation Conference, Melbourne, July 2007.

Meyer, K. & Birbilis, N., ‘Measurement of localised corrosion on the nano-scale’, Proceedings of Corrosion and Prevention ’07, Sydney, Australia, 2007 (extended abstract and poster) ACA.

Ren, Z. & Chan, S.L.I., ‘Mechanical Properties of Nanometric Particulate Reinforced Aluminum Composites’, 2nd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, December 2007.

Yuan, F., Chan S.L.I., Moricca, S. & Eddowes T., ‘Properties of Titanium Matrix Composites Reinforced with Titanium Boride’, 2nd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, December 2007.

Bettles, C., ‘ Magnesium Powder Metallurgy: Process and Materials Opportunities’, MS&T, Detroit, September 2007. Note: Proceedings will appear in a refereed Journal volume (Journal of Materials Engineering and Performance) in 2008.

Bettles, C., Gibson, M. & Venkatesan, K., ‘Age-hardening behaviour in Mg-Zn Alloys micro-alloyed with Alkaline Earth Elements’, The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), Korea, November 2007.

Birbilis, N., ‘High-resolution electrochemical and microscopic characterization of localized corrosion of light alloys: Possibilities and ramifications’, The 58th Annual Meeting of the International Society of Electrochemistry, Banff, Canada, September 2007.

De Geuser, F., Gable, B.M. & Muddle, B.C., ‘Kinetic Monte-Carlo study of trace elements influence on the early stages of clustering in Al-Cu-X alloys’, The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), Jeju Island, Korea, November 2007.

Ferry, M., Xu, W., Cairney, C.M. & Mateesu, N., ‘Development 3D-EBSD tomography for investigating deformed and annealed structures’, Materials and Austceram 2007, Brighton, Sydney, 4-6 July 2007.

Ferry, M., Xu, W., Cairney, C.M. & Mateesu, N., ‘Applications of 3D-EBSD to the study of light alloys’, 2nd International Symposium on Ultralight Materials and Structures, Beijing, China, 14-16 September 2007.

Kanta, A., ‘Modification of Surface Behaviour of Magnesium by Beryllium Alloying’, 1st International Conference - Corrosion and Material Protection, Prague, Czech Republic, 1-4 October 2007.

Kryvasheyeu, Y., Muddle, B.C. & Wang, Y., ‘Mechanisms of θ′ precipitation in Al-Cu: strain energy role in heterogeneous nucleation and ledge growth’, 2nd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals.

Ng, H.P., Lichter, S. Bettles, C.J. & Muddle, B.C., ‘Effect of Grain Size on Discontinuous Precipitation’, presented in the 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), Jeju, Korea, November, 2007.

Skripnyuk, V., Rabkin, E., Estrin, J. & Lapovok, R., ‘Improving hydrogen storage properties of magnesium based composites through the ECAP processing’, HTM-2007, Donetsk, Ukraina, 21-25 May, 2007.

Venkatesan, K. & Bettles, C., ‘The Cold-Rollability of Dilute Magnesium Alloys’, The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), Korea, November 2007.

Zhang, M.-X. & Spencer, K., “Surface Coating of Mg Alloys Using Kinetic Metallization”, The 6th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-6), Jeju, Korea, November 2007.