Barnett MR, Arhatari B, Stanford N, Beer AG, Keshavarz Z, Ma X, 'Some Issues Relating to the Ductility of Wrought Magnesium Alloys', Proceedings of the Magnesium Technology 2008, pp 85-88, edited by Pekguleryuz MO, Neelameggham NR, Beals RS and Nyberg EA, TMS Annual Meeting, New Orleans, USA, 9-13 March 2008.
Barnett MR, Cizek P, 'Identification and rationalization of secondary twin variants in a magnesium alloy', Proceedings of the 15th International Conference on Textures of Materials, CD Rom, Pittsburgh, USA, 1-6 June 2008.
Bettles CJ, Puehringer T, Morton AJ, Tomus D, Gibson MA, 'The effect of Fe additions on the microstructure and mechanical properties of a Ti-Al-Mn alloy, Proceedings of the 5th International Conference on Advanced Materials and Processing, Harbin, China, 3-6 September 2008.
Da Costa Teixeira J, Bourgeois L, Sinclair CW, Hutchinson CR, 'The influence of plate-shaped, shear-resistant precipitates on the work hardening of Al-Cu based alloys: Development of a quantitative description of the σy / εu correlation', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, pp 1606-1612, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Da Costa Teixeira J, Cram DG, Bourgeois L, Hutchinson CR, 'Strategies for increasing the precipitate strengthening in Al alloys containing shear-resistent plate shaped particles', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, pp 1695-1700, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Dahle AK, Lu L, Hardman A, Cooper P, 'Refinement of Al-Si Eutectic Grains - A Novel Method to Produce High-Integrity Al-Si Castings', Proceedings of the 10th Asian Foundry Congress, pp 227-232, Nagoya, Japan, 21-24 May 2008.
Dahle AK, 'Nucleation and Grain Refinement', Proceedings of the Solidification and Gravity 2008, Miskolc, Hungary, 2-6 September 2008, in press.
Dahle AK, Suery M, 'Deformation behaviour of aluminium alloys during solidification', Proceedings of the Solidification and Gravity 2008, 2-6 September 2008, in press.
De Geuser F, Gault B, Weyland M, Bourgeois L, Gable BM, Ringer SP, Muddle BC, 'Atom probe tomography and Transmission Electron Microscopy Study of T1 and Theta’ Precipitation in an Al-Li-Cu-Mg-Ag Alloy', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 1, pp 724-731, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Estrin Y, Khaydarov R, Khaydarov RA, Scheper T, Endres C, Cho SY, 'Antimicrobial and antibacterial effects of silver nanoparticles synthesized by novel electrochemical method', Proceedings of the International Conference on Nanoscience and Nanotechnology, Melbourne, Australia, 25-29 February 2008.
Estrin Y, 'Ultrafine Grained Al Alloys by Severe Plastic Deformation: Processes and Properties', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 1, pp 71-80, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Estrin Y, Vinogradov A, 'Fatigue Behaviour of Ultrafine Grained Light Alloys', Proceedings of the 17th European Conference on Fracture, pp 169-182, edited by Pokluda J, Lukas P, Šandera P and Dlouhý I, Brno, Czech Republic, 2-5 September 2008.
Ghaderi A, Sabirov I, Barnett MR, 'Effect of Grain Size on Deformation Twinning Behaviour of High Mn Steel', Proceedings of the 47th Conference of Metallurgists, Winnipeg, Manitoba, Canada, 2008.
Hutchinson CR, da Costa Teixeira J, Bourgeois L, 'Dynamically responding microstructures: a means to simultaneously achieve high strength and high elongation in Al alloys?', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, pp 1647-1652, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Hutchinson CR, Gable BM, Ciccosillo N, Loo PT, Bastow TJ, Hill AJ, 'An experimental determination of solute-vacancy binding energies in high purity dilute Al-X alloys', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, pp 788-794, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Khaydarov RR, Khaydarov RA, Estrin Y, Evgrafova S, Scheper T, Endres C, Cho SY, 'Silver Nanoparticles: Environmental and Human Health Impacts', Proceedings of the NATO Advanced Research Workshop, Algarve, Portugal, April 2008. Nanomaterials: Risks and Benefits, pp 287-298, edited by Linko I and Steevens J, 2008.
Khor HC, Dyskin AV, Nofal N, Pasternak E, Estrin Y, 'Topological Interlocking - A New Principle in Design of Concrete Structures', Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, Toowoomba, Queensland, Australia, 2-5 December 2008.
Kubota M, Wu X, Xu W, Xia K, ‘Bulk Al Materials from Back Pressure Equal Channel Angular Consolidation of Mechanically Milled Particles’, Proceedings of the 4th International Conference on NanoSPD, Goslar, Germany, 18-22 August 2008. Materials Science Forum, vol 584-586, pp 428-433, 2008.
Lapovok R, Williams T, Estrin Y, 'Fracture of Ultrafine Grained Magnesium Alloy AZ31 under Superplastic Deformation Conditions', Proceedings of the 17th European Conference on Fracture, pp 1725-1732, edited by Pokluda J, Lukas P, Šandera P and Dlouhý I, Brno, Czech Republic, 2-5 September 2008.
Liddicoat PV, Ferragut R, Dupasquier A, Ringer SP, 'Complementary Techniques: Analysis of Vacancy Complexes in Al-Zn-Mg(-Cu) Alloys During Early Stages of Age hardening', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 1, pp 808-814, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Loo PT, Bastow TJ, Hill AJ, da Costa Teixeira J, Hutchinson CR, 'Quantifying the strain-induced dissolution of shearable precipitates in Al alloys', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, pp 751-755, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Lynch SP, Knight SP, Birbilis N, Muddle BC, 'Heat-Treatment, Grain-Boundary Characteristics, and Fracture Resistance of Some Aluminium Alloys', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 2, pp 1409-1415, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Lynch SP, Knight SP, Birbilis N, Muddle BC, 'Stress corrosion cracking of Al-Zn-Mg-Cu alloys: Effects of composition and heat treatment', Proceedings of the 2008 International Hydrogen Conference: Effects of hydrogen on materials, Jackson Hole, WY, USA, 2008, in press.
Marceau RKW, Sha G, Ringer SP, 'Cluster Hardening in Al-Cu-Mg Alloys: Analysis of Cu-Mg Atomic Clustering', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 1, pp 83-90, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Marceau RKW, Sha G, Ringer SP, 'Understanding Solute Segregation to the Dislocation Loops in Al-Cu-Mg Alloys', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 2, pp 1171-1176, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Marceau RKW, Tsafnat N, Liddicoat P, Sha G, Ringer SP, 'Thermal Impact on Laboratory-Scale Heat Treatment Samples During Elevated Temperature Ageing for Short Duration', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 1, pp 134-140, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Moutsos S, Lynch SP, Muddle BC, 'Effects of grain size on age-hardening and fracture behaviour of an AI-Li-Cu-Mg-Zr (8090) Alloy', Proceedings of the 11th International Conference on Aluminium Alloys, Aachen, Germany, 22-26 September 2008. Aluminum Alloys: Their Physical and Mechanical Properties, vol 2, pp 1511-1517, edited by Hirsch J, Skrotzki B and Gottstein G, Wiley-VCH, Weinheim, 2008.
Nagasekhar AV, Cáceres CH, Easton M, 'Effect of cross-sectional geometry and solute content on the tensile properties of high pressure die cast Mg-Al alloys', Proceedings of the Seventeenth International Symposium on Processing and Fabrication of Advance Materials, vol 1, pp 133-139, New Delhi, India, 15-17 December 2008.
Nagasekhar AV, Cáceres CH, Easton M, 'Microstructure development and mechanical behavior in high pressure die cast magnesium-aluminium binary alloys', Proceedings of the Magnesium Technology 2008, pp 343-346, edited by Pekguleryuz MO, Neelameggham NR, Beals RS and Nyberg EA, TMS Annual Meeting, New Orleans, USA, 9-13 March 2008.
Nikulin AY, Dilanian RA, Zatsepin NA, Muddle BC, ‘Three-dimensional x-ray diffraction nanoscopy’. Proceedings of the SPIE Optics + Photonics 2008, San Diego, California, USA, 10-14 August 2008. Instrumentation, Metrology, and Standards for Nanomaufacturing II, pp 70420H-1-10, edited by Postek MT and Allgair JA, SPIE, Bellingham, Washington, 2008.
Quadir MZ, Ferry M, Al-Buhamad O, Bassman L, 'Texture randomization by intense shearing in a layered ARB sheet of Al and Al(0.3%Sc)'. Proceedings of the 15th International Conference on Textures of Materials, CD Rom, Pittsburgh, USA, 1-6 June 2008.
Sabirov I, Timokhina I, Barnett MR, Hodgson PD, 'The microstructure evolution and mechanical properties of Cryorolled AL Alloys', The 12th International Conference, Metal Forming 2008, Akademia Gorniczo-Hutnicza Conference Proceedings, vol 2, pp 190-194, Krakow, Poland, 21-24 September 2008.
Wu X, Xu W, Kubota M, Xia K, 'Bulk Mg Produced by Back Pressure Equal Channel Angular Consolidation (BP- ECAC)', Proceedings of the 4th International Conference on NanoSPD, Goslar, Germany, 18-22 August 2008. Materials Science Forum, vol 584-586, pp 114-118, 2008.
Xia K, Xu W, Wu X, Goussous S, 'Bulk Ultrafine and Nanostructured Materials from Consolidation of Particles by Back Pressure Equal Channel Angular Pressing," Proceedings of the 4th International Conference on NanoSPD, Goslar, Germany, 18-22 August 2008. Materials Science Forum, vol 584-586, pp 119-126, 2008.
Xu W, Wu X, Sadedin D, Wellwood G, Xia K, 'High strength Ti of substantial interstitial contents produced by back pressure equal channel angular consolidation of dehydrided particles', Proceedings of the 4th International Conference on NanoSPD, Goslar, Germany, 18-22 August 2008. Materials Science Forum, vol 584-586, pp 92-96, 2008.
Xu W, Wu X, Sadedin D, Xia K, 'Equal Channel Angular Consolidation and Deformation of Titanium Based Alloys," Proceedings of the Materials and Austceram 2007 International Conference, Sydney, Australia, 4-6 July 2007. Materials Forum, vol 32, pp 29-34, 2008.
Yamada Y, Banna T, Li Y, Wen C, 'Effects of Pore Morphology on the Compressive Behaviour of Porous Metals', Proceedings of the International Conference on Porous Metals and Metallic Foams, pp 415-418, edited by Lefebvre LP, Banhart J and Dunand DC, 2008.
Zhang X, Zhu H, Dahle AK, Couper M, 'Mechanisms of Streaking on Anodized 6xxx Series Extrusions', Proceedings of the Ninth International Aluminum Extrusion Technology Seminar & Exposition, Extrusion Technology for Aluminum Foundation, Vol 2, Orlando, Florida, 13-16 May 2008.
Zatsepin, NA, Dilanian R, Nikulin AY, Gable BM, Muddle BC, Sakata O, ‘Towards in situ x-ray diffraction imaging at the nanometer scale’, Proceedings of the SPIE Optics + Photonics 2008, San Diego, California, USA, 10-14 August 2008. Instrumentation, Metrology, and Standards for Nanomaufacturing II, pp 70420F-1-10, edited by Postek MT and Allgair JA, SPIE, Bellingham, Washington, 2008.
Birbilis N, Hutchinson CR, Quirk SE, Cavanaugh MK, Ringer SP, 'Corrosion of a new class of solid solution Al alloys', Proceedings Symposium Corrosion and Electrochemical Properties of Bulk Metallic Glasses and Nano-Crystalline Materials, 214th Meeting of the Electrochemical Society, Honolulu, ISA, 1pp, 2008.
Cavanaugh MK, Birbilis N, Buchheit RG, 'A Quantitative Study on the Effects of Environment and Microstructure on Pit Initiation in Al-alloys', Proceedings of the Symposium in Critical Factors in Localized Corrosion 6, in Honor of Professor Shibata, 214th Meeting of the Electrochemical Society, Honolulu, USA 1pp, 2008.
Cáceres C, Mann G, Griffiths J, 'The Hall-Petch relationship in Mg-Zn solid solutions', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals,, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Chun YB, Davies C, 'In-grain misorientation axes distribution of rolled AZ31 and its correlation with deformation mechanism', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Cizek P, Sabirov I, Ghaderi A, Barnett M, Hutchinson B, 'Deformation modes and anisotropy in magnesium alloy AZ31', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Dayal P, Savvides N, Hoffman M, 'Microstructure and mechanical properties of multilayered Al/Pd thin film', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Haley D, Petersen T, Barton G, Ringer S, 'Radial distribution functions of bulk metallic glasses from HRTEM and APT', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Haley D, Petersen T, Barton G, Ringer SP, 'Evaporation and Radial distribution functions in APT', 2nd Atom Probe Reconstruction Summit, Sydney, Australia, 2008, Oral presentation.
Haley D, Petersen T, Barton G, Ringer SP, 'Radial Distribution Functions & Evaporation in APT', Australian Research Network for Advanced Materials Annual Workshop, Geelong, Australia, December 2008, Oral presentation.
Haley D, Petersen T, Barton G, Ringer SP, 'Atom probe tomography of metallic glasses', International Field Emission Symposium IV, Ruoen, France, August 2008, Poster presentation.
Haley D, Petersen T, Barton G, Ringer SP, 'Radial Structure of Mg65Cu25Y10 From Complementary APT and Energy Filtered Electron Diffraction', Australian Conference in Microscopy and Microanalysis, Perth, Australian, February 2008, Oral presentation.
Han Y, Birbilis N, Muddle BC, 'Microstructural study of interfacial region of cold sprayed Cu coating on light alloy substrates'. 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Idris M, Vodenitcharova T, Hoffman M, 'Contact damage response of foam-based sandwich panels to quasi-static and impact indentation', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Kabir KR, Vodenitcharova T, Hoffman M, 'Indentation response of metallic foams and sandwich panels', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Katsoulotos S, Lynch S, Muddle B, Xiong XY, King R, 'Understanding the fracture behaviour of Al-Li alloys', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Keshavarz Z, Barnett M, Beer A, 'The static recrystallisation behaviour of magnesium alloy AZ31', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Kim HS, Yoon SC, Nagasekhar AV, 'Comparison of modified equal channel angular pressing', International symposium on giant strain processing of advanced materials, Fukuoka, Japan, 21-24 November 2008.
Kumar A, Mechler A, Martin L, Muddle B, 'Electrochemical and AFM-SKPFM study of the chemical pretreatments to the surface of AA2024-T3', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Lau KD, Al-Buhamad O, Zakaria Quadir M, Ferry M, 'Texture evolution of high purity aluminium sheets produced by accumulative roll bonding', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Laws K, Shamlae K, Ferry M, 'Prediction of metallic glass-forming compositions', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Li J, Sha G, Jie W, Ringer SP, 'Characterisation of nano-scale precipitation phase of Mg-6Zn-2Cu-0.4Mn (wt%) alloy', Commemorative Symposium celebrating the Golden Jubilee of the Electron Microscope Unit 2008, Sydney, Australia, Poster presentation.
Li J, Sha G, Wang T, Jie W, Ringer SP, 'Characterization of nano-scale precipitates phase in Mg-2.8Nd-0.6Gd-0.2Zn-0.4Zr (wt. %) alloy', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Li S, Muddle B, Jahedi M, Soria J, 'Numerical investigation of cold spray process', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Li S, Sha G, Marceau RKW, Ringer SP, 'Atom Probe Tomography Characterisation of Solute Clustering in 6111 Al Alloy', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Li S, Sha G, Marceau RKW, Ringer SP, 'Atom Probe Tomography Characterisation of Solute Clustering in 6111 Al Alloy', Australian Research Network for Advanced Materials Annual Workshop, Geelong, Australia, December 2008, Poster and oral presentation.
Li S, Sha G, Marceau RKW, Ringer SP, 'Atom Probe Tomography Characterisation of Solute Clustering in 6111 Al Alloy', Commemorative Symposium celebrating the Golden Jubilee of the Electron Microscope Unit 2008, Sydney, Australia. Poster presentation.
Liddicoat P, Ringer S, 'Novel grain boundary solute architecture in a nanostructured ultra high strength 7075 aluminium alloy', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Liu M, Zanna S, Ardelean H, Frateur I, Schmutz P, Zhao MC, Atrens A, Marcus P, 'Surface films formed on the intermetallic Al3Mg2', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Low R, Robertson I, Qian M, Schaffer G, 'Sintering of titanium powder compacts for containerless hot isostatic pressing', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Lui E, Xu W, Wu X, Xia K, 'Consolidation of ball-milled Ti-Al elemental powder mixture using BP-ECAP', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Marceau RKW, Sha G, Ringer SP, 'Understanding Solute Segregation to Dislocation Loops in Al-Cu-Mg Alloys', Australian Research Network for Advanced Materials Annual Workshop, Geelong, Australia, December 2008, Poster and oral presentation.
Marceau RKW, Tsafnat N, Liddicoat PV, Ringer SP, 'Thermal Impact on Laboratory-Scale Samples During Ageing at Elevated Temperature for a Short Duration', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Marceau RKW, Tsafnat N, Ringer SP, 'Thermal impact on laboratory-scale samples during ageing at elevated temperature for a short duration’, 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Meylan B, Gourlay C, Dahle A, 'Reynold's dilatancy in Al-10Cu', ARC Centre of Excellence for Design in Light Metals Annual Workshop 2008, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Moy C, Bocciarelli M, Ringer SP, Ranzi G, 'Application of inverse analysis simulation technique to characterise material properties using instrumented indentation experiments', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Moy C, Jahedi M, Ranzi G, Ringer SP, 'Microstructure examination of cold gas dynamic spray (CGDS) Ti powder deposits', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, November 2008, Poster and oral presentation.
Nagasekhar AV, Cáceres C, 'Three dimensional characterization of pseudo-micro truss structures in high pressure die cast AZ91alloys', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Nagasekhar AV, Easton M, Cáceres C, 'Effect of solute content on the grain structure of high pressure die cast magnesium-aluminium alloys', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Nagasekhar AV, Tick-Hon Y, 'Finite element modelling and experimental validation of equal channel angular pressing', Ultrafine Grain Materials V, TMS Annual Meeting & Exhibition, New Orleans, USA, 9-13 March 2008.
Nakashima PNH, Bourgeois LN, Muddle BC, 'Interrogation of Void-like Objects in Al-Cu-Sn', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Nakashima PNH, 'Differential Electron Diffraction, Ultra-High Resolution TEM: Imaging and Diffraction', One-day Research Symposium as part of the Monash Centre for Electron Microscopy Opening Celebrations, Melbourne, Australia, December 2008.
Proust G, Shen L, Ranzi G, 'Numerical modelling of deformations in metals at different length scales', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Robertson I, Schaffer G, 'A model for the densification of Ti during sintering', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Robin L, Laws K, Ferry M, 'Mg - based bulk metallic glass composite', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Sabirov I, Barnett M, Kashyap B, Estrin Y, Timokhina I, Hodgson P, 'Deformation behavior and microstructural evolution in an ultra-fine grained Al-Mg-Si alloy at elevated temperatures', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Sha G, Cererzo A, Smith GDW, Ringer SP, 'The effect of laser pulsing on field evaporation of field-ion specimens', International Field Emission Symposium IV, Rouen, France, August 2008, Poster presentation.
Sha G, La Fontaine A, Ringer SP, 'Evaluation solute clustering in dilute multi-component alloy system', 2nd Atom Probe Reconstruction Summit, Sydney, Australia, 2008, Oral presentation.
Sha G, Liao XZ, Ringer SP, Duan ZC, Langdon T, 'Understanding precipitation in 7136 Al alloys during equal-channel angular pressing', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Sha G, Ringer SP, 'Materials Response to Picosecond Pulse Laser Induced Field Evaporation', International Field Emission Symposium IV, Ruoen, France, August 2008, Oral presentation.
Sha G, Ringer SP, 'The effect of laser pulse energy on the measured composition of vA6111 Al alloy', International Field Emission Symposium IV, Ruoen, France, August 2008, Oral presentation.
Smith A, 'First principles calculations of stacking faults for titanium', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Spencer K, Zhang M, 'Kinetic metallization of Al-MMC coatings on Mg alloys for improved corrosion and wear resistance', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Südholz A, Birbilis N, Gibson M, Easton M, 'The corrosion behaviour of HPDC Mg-RE alloys', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Swamy V, Muddle BC, 'First-principles calculations of high-coordinated group-IV metal dioxides'. TMS Annual Meeting & Exhibition, New Orleans, USA, 9-13 March 2008, Oral presentation.
Swamy V, Muddle BC, 'Pressure-induced phase transitions in semiconductors'. International Union of Materials Research Societies International Conference for Electronic Materials, Sydney, Australia, 28 July - 1 August 2008. Oral presentation.
Swamy V, 'Pressure-induced phase transitions in nanoscale silicon', Frontiers in Materials Science and Technology, Brisbane, Australia, 26-28 March 2008.
Tomus D, Bettles C, Gibson M, 'The role of microstructure in the mechanical behaviour of Ti-1.5wt%Fe alloys containing O and N', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Australia, 25-26 November 2008, Poster presentation.
Tomus D, Lapovok R, Skripnyuk V, Barnett M, Gibson M, 'The effect of hydrogenation on the compaction of Ti-6Al-4V powder', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Vodenitcharova T, Idris M, Kabir KR, Hoffman M, 'Modelling of indentation of sandwich panels with hemispherical indenters', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Wen C, Li Y, Xiong J, Hodgson P, 'Preparation of porous titanium-molybdenum alloy scaffold for implant material applications', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Wu X, Xu W, Xia K, 'Consolidation of pure Mg particles into bulk materials by back pressure equal channel angular processing', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Xie H, Li Y, Wen C, Hodgson P, 'Shear bands evolution in an annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Xu W, Ferry M, 'High resolution 3-D study recrystallization behaviours in cold rolled if steel using FIB-EBSD tomography', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Xu W, Wu X, Calin M, Stoica M, Eckert J, Xia K, 'Ultrafine-structure formation in metastable beta-titanium alloy via severe plastic deformation', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Xu W, Wu X, Xia K, 'Nanostructured Ti/TiN composites consolidated using back pressure equal channel angular processing', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster and oral presentation.
Yang D, Wen C, Hodgson P, 'Investigation on structure and mechanical properties of multilayered Ti/Al laminate produced by accumulative roll bonding process', 3rd Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Brisbane, Australia, 25-26 November 2008, Poster presentation.
Yu Kuznetsov A, Machado R, Swamy V, Achete CA, 'Determination of crystallite size and shape by X-ray diffraction method', NANO2008 9th International Conference on Nanostructured Materials, Rio de Janeiro, Brazil, 1-6 June 2008.
Yu Kuznetsov A, Swamy V, Gomes L, Calderon H, Prakapenka V, Achete CA, 'Crystallite morphology of rutile TiO2 nanocrystals: a TEM study'. Microscopy & Microanalysis 2008 Meeting, Albuquerque, New Mexico, 3-7 August 2008.
Yu Kuznetsov A, Swamy V, Machado R, Lucchese MM, Jorio A, Achete CA, 'Determination of nanocrystallite morphology by X-ray diffraction and Raman spectroscopy methods'. The VII Annual Meeting of the Brazilian Materials Society, São Paulo, Brazil, 28 September - 2 October 2008.