Al-Buhamad O, Quadir MZ & Ferry M, 'Some aspects on grain growth in ECAP deformed & heat treated Aluminium 1.2% Hafnium alloy', Proceedings of the 15th International Conference on Textures of Materials, Pittsburgh, USA, 1 - 6 June 2009. Ceramic Transactions, vol 201, pp 709-716, 2009.
Barnett MR, 'The challenge of inhomogeneous deformation in magnesium & its alloys', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 227-232, 2009.
Estrin Y, Dyskin A, Pasternak E & Schaare S, 'Topological interlocking in design of structures & materials', Proceedings of the Materials Research Society Symposium, Warrendale, PA, USA, 2009. Architectured Multifunctional Materials, edited by Brechet Y, Embury JD & Onck PR, vol 1188, pp LL05-06, 2009.
Geng J & Nie JF, 'Age hardening behaviour of Mg-Zn-Co alloys with icroalloying additions', Materials & Austceram 2009, Surfers Paradise, Queensl&, Australia, 1-3 July 2009. Materials Forum, in press.
Ghaderi A & Barnett MR, 'Effect of grain size on deformation twinning in commercial purity titanium', Proceedings of the Materials & AustCeram 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Gibson MA, Bettles CJ, Zhu S, Easton MA & Nie JF, 'Microstructure & mechanical properties of an Mg-rare earth based alloy AM-SC1', Proceedings of the TMS 2009 138th Annual Meeting & Exhibition, San Francisco, California, USA, 15 - 19 February 2009. Magnesium Technology 2009, pp 243-248, 2009.
Hutchinson CR, 'Modelling microstructural evolution & property development in the ARC Centre of Excellence for Design in Light Metals', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 195-198, 2009.
Kabir KR, Vodenitcharova T & Hoffman M, 'Residual strength in bending of damaged hybrid s&wich panels with an aluminium foam core', Proceedings of the 17th International Conference on Composite Materials, Edinburgh, UK, 27 - 31 Jul 2009, in press.
Kent D, Schaffer GB, Qian M & Liu ZY, 'Formation of aluminium nitride during sintering of powder injection moulded aluminium', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 631-634, 2009.
Khaydarov RR, Khaydarov RA, Gapurova O, Estrin Y, Evgrafova S, Scheper T & Cho SY, 'Antimicrobial effects of silver nanoparticles synthesized by an electrochemical method', Proceedings of the NATO Advanced Study Institute Biodefence: Advanced Materials & Methods for Health Protection, Samark&, Uzbeikistan, 6 - 10 June 2009. NATO Science for Peace & Security Series B - Physics & Biophysics, edited by Reithmaier JP, Petkov P, Kulisch W & Popov C, pp 215-218, 2009.
King K, Liu B, Zakaria Quadir MD, Ferry M & Bassman L, 'Novel method for identifying low-angle sub-grain boundaries', Proceedings of the TMS 2009 138th Annual Meeting & Exhibition, San Francisco, California, USA , 15 - 19 February 2009. TMS Supplemental Proceedings, vol 3: General Paper Selections, pp 669-676, 2009.
Lapovok R & Tomus D, 'Low temperature compaction of titanium alloy powder by Equal Channel Angular Extrusion with back pressure', Proceedings of the TMS 2009 138th Annual Meeting & Exhibition, San Francisco, California, USA, 15 - 19 February 2009. TMS Supplemental Proceedings, vol 1:Fabrication, Materials, Processing & Properties, pp 557-563, 2009.
Lathabai S, Migeon R, Tyagi VK, O'Donnell RG & Estrin Y, 'Friction stir processing: a technique for microstructural refinement in metallic materials', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 63-67, 2009.
Lau KD, Quadir MZ & Ferry M, 'Shearing behaviour & texture evolution in aluminium sheets deformed by accumulative roll bonding', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 575-578, 2009.
Liu M, Zanna S, Ardeleane H, Frateur I, Schmutz P, Song G, Atrens A & Marcus P, 'A preliminary quantitative XPS study of the surface films formed on pure magnesium & on magnesium-aluminum intermetallics by exposure to high-purity water', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 255-262, 2009.
Low RJ, Robertson IM, Qian M & Schaffer GB, 'Sintering of titanium powder compacts for containerless hot isostatic pressing'. Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 509-512, 2009.
Marceau RKW, Sha G, Lumley RN & Ringer SP, 'Solute clustering during T6 & T6I4 ageing in Al-Cu-Mg', Materials & Austceram Conference 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Moy C, Bocciarelli M, Ringer SP & Ranzi G, 'Mechanical characterisation of material properties using instrumented indentation experiments', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 215-218, 2009.
Nagasekhar AV & Kim HS, 'Influence of material properties on strain homogeneity in different equal channel angular pressing processes, Proceedings of the 15th International Conference on Strength of Materials, Dresden, Germany, 16 - 21 August 2009. Journal of Physics: Conference Series, in press.
Nagasekhar AV, Cáceres C & Easton M, 'Role of solute content on the intermetallic structure development in hpdc Mg-Al binary alloys', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 479-482, 2009.
Nagasekhar AV, Cáceres C & Kong C, 'Intermetallics distribution in two & three dimensions in high pressure die cast AZ91 alloy', Proceedings of the TMS 2009 138th Annual Meeting & Exhibition, San Francisco, California, USA, 15 - 19 February 2009. Magnesium Technology 2009, pp 101-104, 2009.
Nagasekhar AV, Cáceres C & Kong C, 'On the development of a micro-truss intermetallic structure in high pressure die cast AZ91 alloy, Proceedings of the 15th International Conference on Strength of Materials, Dresden, Germany, 16 - 21 August 2009. Journal of Physics: Conference Series, in press.
Quarfoth R, Quadir MZ, Bassman L & Ferry M, 'Finite element modeling of compression of a polycrystalline layer showing b&ing behavior', Proceedings of the TMS 2009 138th Annual Meeting & Exhibition, San Francisco, USA, 15 - 19 February 2009. TMS Supplmental proceedings, vol 3: General Paper Selections, pp 661-667, 2009.
Ralston KD & Birbilis N, 'Grain size effects on alloy corrosion', Proceedings of the Materials & AustCeram 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Sha G, Li JH, Jie WQ & Ringer SP, 'Atom probe tomography characterization of early-stage precipitates in an Mg-Gd-Nd-Zn alloy', Proceedings of 8th International Conference on Magnesium Alloys & their Applications, Weimar, Germany. Magnesium, 26 - 29 October 2009, edited by Kainer KU, pp 40, 2009.
Shen L & Chen Z, 'Model-based simulation of the responses of ultrananocrystalline diamond & nano structures', Proceedings of the Second International Conference on Smart Materials & Nanotechnology in Engineering, Weihai, China, 8 - 11 July 2009. SPIE, edited by Leng J, Asundi AK & Ecke W, Vol. 7493, pp 74930Y, 2009.
Shi ZM & Zhang M-X, 'A novel mirco-arc anodising process for aluminium alloys containing high silicon', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 279-282, 2009.
Spencer K & Zhang M-X, 'Heat treatment of cold spray coatings to form intermetallic layers', Proceedings of the Materials & AustCeram 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Spencer K, Fabijanic DM & Zhang M-X, 'Cold spray of Al-MMC coatings on magnesium alloys for improved corrosion & wear resistance', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June-1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 377-380, 2009.
Stanford N, 'Fine grained AZ31 by conventional thermo-mechanical processing', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 239-244, 2009.
Stanford N, Sha G, Beer A, Ringer SP & Barnett M, 'Recrystalisation texture weakening in Mg alloys with misch metal - effect of deformation mode, strain & initial grain size', Proceedings of 8th International Conference on Magnesium Alloys & their Applications, Weimar, Germany, 26 - 29 October 2009. Magnesium, edited by Kainer KU, pp 19, 2009.
Tomus D, Lynch P, Bettles C, Gibson M & Stevenson A, 'A comparative EBSD & micro-XRD study of the intergranular grain structure in CP-Ti', Proceedings of the 11th International Symposium on Radiation Physics, Melbourne, Australia, 20 - 25 September 2009. Nuclear Instruments & Methods in Physics Research Section A, DOI: doi:10.1016/j.nima.2009.12.005, in press.
Xie HW, Hodgson PD & Wen CE, 'Effect of structure relaxation on the plastic deformation behaviour in a Zr-based BMG under indenter', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 437-441, 2009.
Yang DK, Hodgson PD & Wen CE, 'Nucleation & growth during reactions in accumulative roll bonding of Ti/Al Multilayers', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 429-432, 2009.
Yang K, Nagasekhar AV & Cáceres CH, 'Cross sectional geometry & microhardness mapping of high pressure die cast Mg-Al alloys', Proceedings of the International Conference on Manufacturing Science & Engineering, Zhuhai, China, 26 - 28 Dec 2009. Advanced Materials Research, in press.
Yu P, Qian M, Tomus D, Brice CA, Schaffer GB & Muddle BC, 'Electron beam processing of aluminium alloys', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 621-626, 2009.
Zhang J & Xia K, 'TiAl turbochargers for automobile application', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 559-562, 2009.
Zhao MC, Uggowitzer P, Liu M, Schmutz P, Song G & Atrens A, 'Corrosion of AZ91 - Influence of the Beta-Phase Morphology', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 473-478, 2009.
Zhou X & Nie JF, ‘Effects of multiple ageing treatments on precipitate distributions & fracture toughness in Mg-Y-Nd alloys’, Materials & Austceram 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Zhu SM, Gibson MA, Nie JF, Easton MA & Bettles CJ, 'On the creep resistance of HPDC Mg-RE based alloys', Proceedings of the 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009. Materials Science Forum, edited by Dargusch MS & Keay SM, vol 618-619, pp 453-458, 2009.
Zhu YM, Ohishi K, Hono K, Morton AJ & Nie JF, ‘Characterization of precipitates in Mg-Y-Ag-Zn alloys by high-angle annular dark-field scanning transmission electron microscopy & 3D atom probe’, Materials & Austceram 2009, Surfers Paradise, Queensl&, Australia, 1 - 3 July 2009. Materials Forum, in press.
Cao L, Rometsch P, Zhong H, Mulji Y, Gao X & Muddle BC, 'Effect of natural ageing on the artificial ageing response of an Al-Mg-Si-Cu alloy', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Chen H, Gao X, Rometsch P, Xu D & Muddle BC, 'Dissolution & melting of constituent particles in a DC-Cast 7150 alloy during homogenisation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Chen Y & Hutchinson CR, 'Design of bi-modal precipitate distributions for superior combinations of yield strength & uniform elongation in engineering alloys', Monash University Materials Engineering Postgraduate Conference, Clayton, Australia, 8 July 2009, Oral Presentation.
Chen Y, Weyl& M & Hutchinson CR, 'The effect of bi-modal precipitate distributions on the strength-elongation combinations in Al-Cu alloys', 2009’ Tri-University Research Workshop on Advanced Engineering, Changsha, China, 30 November - 1 December 2009, Oral Presentation.
Chen Y, Weyl& M & Hutchinson CR, 'Underst&ing the effect of GP zones on the work hardening in Al-Cu alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Chen Y, Weylang M & Hutchinson CR, 'The Effect of Bi-modal precipitate distributions on the strength-elongation combinations in Al-Cu alloys', Monash University Materials Engineering Postgraduate Conference, Clayton, Australia, 4 December 2009, Oral Presentation.
Chun Y & Davies C, 'Twinning-induced mechanical anomalies in magnesium wrought alloy AZ31', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Cizek P & Barnett M, 'Characteristics of contraction twins formed in Mg-3Al-1Zn alloy during tensile deformation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Dayal P, Quadir MZ, Kong C, Savvides N & Hoffman M, 'Underst&ing strengthening in nanolayered Al/Pd thin films', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Estrin Y, 'Introduction to geometry-inspired design of structures & materials', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Fabijanic D & Hodgson P, 'Surface alloying of light metals', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Ghaderi A & Barnett M, 'Effect of grain size on deformation twinning activity in commercially pure titanium', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Ghaderi A & Barnett MR, 'Effect of grain size on mechanical properties & deformation twinning behavior of CP Ti', 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June-1 July 2009, Oral presentation.
Goussous S, Li JZ, Wu X, Xu W & Kia K, 'Mechanical property tailoring in Al-based composites & pure Mg by microstructure control through severe plastic deformation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Guo W, Quadir MZ, Ferry M, Eddowes T & Moricca S, 'Thermomechanical behaviour of a multifunctional titanium alloy', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Han W & Hutchinson CR, 'Dynamic precipitation during cyclic deformation in under aged Al-4Cu containing θ' precipitates', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Han W & Hutchinson CR, 'Evolution of internal stress during cyclic deformation of Al-4Cu as a function of θ' precipitate state', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Hayazi NF & Chan S, 'Thermal Decomposition of TiH2 Powder', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Hodgson P, 'Nanostructural engineering of metals', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Kumar A, Birbilis N & Muddle BC, 'Application of silane conversion coating on aluminium alloy AA2024-T3', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Lau KD, Quadir MZ & Ferry M, 'Influence of through thickness shear strain on substructure fragmentation in ARB Al sheet', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Laws K, Shamlaye K, Gun B, Wong K & Ferry Michael, 'Prediction of glass-forming compositions in metallic systems – The development of new bulk metallic glasses', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Li JH, Sha G, Jie WQ & Ringer SP, 'The mechanical properties & microstructures of Mg-Nd-Zn-Zr Alloys Micro-alloyed with Y', 8th International Conference on Magnesium Alloys & their Applications, Weimar, Germany, 26 - 29 October 2009, Oral presentation.
Lim JB, Bettles C & Muddle BC, 'Effects of impurity elements on compaction behaviour of commercially pure titanium powders', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Lim JB, Bettles C & Muddle BC, 'Effects of impurity elements on compaction behaviour of commercially pure titanium powders', Monash University Materials Engineering Postgraduate Conference, Clayton, Australia, 4 December 2009, Oral Presentation.
Liu M, Uggowitzer P, Nagasekhar AV, Schmutz P, Easton M, Song G & Atrens A, 'Fe tolerance limits, Mg corrosion & production of high purity alloys from low purity feedstock', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Low R, Schaffer G & Qian M, 'Scavenging of chlorine & sulphur impurities from titanium powder with trace additions of ‘Compound-X’', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Lui E, Xu W, Wu X & Xia K, 'Consolidation of ball-milled Ti-Al powders via BP-ECAP', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Lui E, Xu W, Wu X, Goussous S & Xia K, 'Multiphase light alloys & nanocomposites through consolidation of particles by severe plastic deformation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Malekjani S, Hodgson P, Sabirov I & Hiditch T, 'Cyclic deformation behaviour of ultrafine pure Al', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Marceau RKW & Ringer SP, 'Outlook for design in 2xxx Al alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Meylan B, Gourley C & Dahle A, 'Shear deformation of light alloys during solidification', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Molotnikov A, Estrin Y & Muddle BC, 'Geometrically inspired materials design', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Moutsos S, Muddle BC & Lynch S, 'Effect of grain size on age-hardening & fracture mode of 8090 Al-Li alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Moutsos S, Muddle BC & Lynch S, 'The effect of slip mode on fracture of aluminium alloys', Monash University Materials Engineering Postgraduate Conference, Clayton, Australia, 4 December 2009, Oral Presentation.
Moy C, Bocciarelli M, Ringer SP & Ranzi G, 'Identification of multilayer material properties based on the application of an inverse analysis technique', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Nagasekhar AV, Cáceres C & Easton M, 'Growth restriction factor influence on grain structure development in high pressure die cast Mg-Al binary alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Nakashima P, Smith A, Qiu C & Muddle BC, 'Chemical bonding in aluminium & its alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Ng HP, Bettles C & Muddle BC, 'Nucleation of α-phase in metastable β-titanium alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Qian M, Low R, Luo S, Yang YF & Schaffer GS, 'Sintering of titanium & its alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Quadir MZ, Al-Buhamad O, Lau KD, Quarfoth R, Bassman L, Munroe P & Ferry M, 'Accumulative roll bonding of aluminium alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Quan L, Gao X & Muddle BC, 'Precipitation in aluminum alloy 2024 under applied elastic stress', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Ralston K, Birbilis N, Hutchinson C & Ringer SP, 'Localised Corrosion on the Nanoscale of Medium Strength Al-Cu-Mg Alloys', 60th Annual Meeting of the International Society of Electrochemistry, Beijing, China, 16 - 21 August 2009, Oral presentation.
Ralston K, Birbilis N, Hutchinson C & Weyl& M, 'Corrosion resistant medium strength Al-Cu-Mg alloys', Corrosion & Prevention, Coffs Harbour, Australia, 15 - 18 November 2009, Oral presentation.
Sha G, Liao X, Lapovok R, Li J, Xu W, Xia K, Jie W & Ringer SP, 'On new precipitate microstructures & new property-performance in Al & Mg alloys through severe plastic deformation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Sha G, Liao XZ, Ringer SP, Duan ZC & Langdon TG, 'Formation of equal-axied precipitates in 7136 Al alloys by Equal-Channel Angular Pressing', 4th International Light Metals Technology Conference 2009, Gold Coast, Australia, 28 June - 1 July 2009, Oral presentation.
Shamlaye K, Laws K & Ferry M, 'Discovery of novel bulk metallic glasses: Silver BMGs', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Shen L, Ranzi G, Proust G, 'Computational modelling & simulation on hybrid structures', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Shi ZM & Atrens A, 'Corrosion of Pure Magnesium in 3.5% NaCl Saturated with Mg(OH)2 Solution', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Shih J, Weyl& M & Muddle BC, 'Precipitation in high-strength Al-Cu-Li alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Shih J, Weyl& M & Muddle BC, 'Precipitation in high-strength Al-Cu-Li alloys', Monash University Materials Engineering Postgraduate Conference, Clayton, Australia, 4 December 2009, Oral Presentation.
Spencer K, Luzin V, Fabijanic D & Zhang M-X, 'Characterisation of cold spray coatings', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Sreekumar VM, Tonguy M, Nouri A & Barnett M, 'Investigation on the development of hybrid materials with improved plastic buckling', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Stanford N & Barnett M, 'Deformation mechanisms of magnesium-based alloys, 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Südholz A, Birbilis N, Easton M & Gibson M, 'A deconstruction approach to investigating the corrosion behaviour of Mg-rare earth alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Tang GCH, Hoffman M, Yan J, Quadir MZ & Lapovok R, 'Cyclic fatigue crack growth in ultrafine grained aluminium', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Terzi S, Salvo L, Suery M, Taylor J, Boller E & Dahle A, 'In situ microtomography studies of aluminium alloys: coarsening & solidification', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Tomus D, Lynch P, Bettles C, Gibson M & Stevenson A, 'A comparative EBSD & Micro-XRD study of the intergranular grain structure in CP-Ti', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Tomus D, Lynch P, Bettles C, Gibson M & Stevenson A, 'In-situ observation of strain evolution in CP-Ti during uniaxial tensile loading', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Tomus D, Yu P, Qian M, Brice C, Schaffer GB & Muddle BC, 'Electron beam processing of aluminium alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Vodenitcharova T, Idris M, Kabir K & Hoffman M, 'A study of indentation of s&wich panels with thin Al face sheets & Al foam core', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Welk B, Collins P, Gibson M, Bettles C & Fraser H, 'LENS™ Deposition of α2+γ+β2 structures based on Ti-Al-Fe', 2009 TMS Annual Meeting & Exhibition, San Francisco, California, USA, 15 - 19 February 2009, Oral presentation.
Xu D, Rometsch P, Chen H, Lynch S, Gao X & Muddle BC, 'Effect of solution treatment on microstructure & mechanical properties of thick plate 7150 aluminium alloy', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Xu W, Wu X & Xia K, 'Nanostructured Ti/TiN composites consolidated using back pressure equal channel angular processing', 15th International Conference on the Strength of Materials, Dresden, Germany, 16 - 21 August 2009, Oral presentation.
Xu W, Wu X, Stoica M, Calin M, Figueiredo R, Eckert J, Langdon T & Xia K, 'Microstructure control & structure-property relationship in ultrafine-grained/nanostructured Ti-based alloys & composites', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Xu W, Wu X, Stoica M, Figueiredo R, Calin M, Luo P, Eckert J, Langdon T & Xia K, 'Enhancement of properties in Ti-based materials by severe plastic deformation', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral presentation.
Xu W, Zheng R, Robin L, Laws K & Ferry M, 'Phase transformations in Mg-based BMG composite during cooling from the melt', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Yang D, Hodgson P & Wen C, 'Shear b& evolution & nanostructure formation in titanium by cold rolling', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.
Yang K, Nagasekhar AV & Cáceres C, 'Micro hardness mapping of high pressure die cast Mg-Al binary alloys', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Oral & poster presentation.
Yao Y & Chan S, 'Fabrication of aluminium–silicon carbide (Al/SiC) composite using conventional ball milling', 4th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Geelong, Australia, 9 - 10 December 2009, Poster presentation.