Atrens A, Winzer N & Dietzel W, 'Overview of stress corrosion, cracking of magnesium alloys', Proceedings of the Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 16, 2010.
Bjørge R., Nakashima PNH, Marioara CD, Andersen SJ, Muddle BC, Etheridge J & Holmestad R, 'Precipitate/matrix interface in an Al-Mg-Ge alloy studied by annular dark-field scanning transmission electron microscopy', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1391-1396, 2010.
Buchheit R, Cavanaugh MK & Birbilis N, 'Using artificial neural networks to model the environmental dependence of pit growth in aluminium alloys', Proceedings of the Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 77, 2010.
Cao L, Rometsch PA, Zhong H & Muddle BC, 'Effect of pre-ageing on the artificial ageing response of Al-Mg-Si(-Cu) alloys', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 918-921, 2010.
Cao L, Rometsch PA, Zhong H, Mulji Y, Gao X & Muddle BC, 'Effect of natural ageing on the artificial ageing response of an Al-Mg-Si-Cu alloy', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 395-400, 2010.
Chen H, Gao X, Rometsch PA, Xu D & Muddle BC, 'Dissolution and melting of constituent particles in a DC-cast (Al-Zn-Mg-Cu) alloy 7150 during homogenisation', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1656-1661, 2010.
Chen XB, Birbilis N & Abbott TA, 'Phosphate conversion coatings for magnesium and its alloys', Proceedings of Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 84, 2010.
Chen Y, Weyland M & Hutchinson CR, 'The effect of bimodal precipitate distributions on the strength-elongation combinations of Al-Cu alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 469-474, 2010.
Chun YB & Davies CHJ, 'The evolution of In-grain Misorientation Axes (IGMA) during deformation of wrought magnesium alloy AZ31', Proceedings of Magnesium Technology 2010, Seattle, USA, 13-18 February 2010. Magnesium Technology 2010, edited by Agnew SR, Neelameggham NR, Nyberg EA and Sillekens WH, pp 433-437, 2010.
Chun YB & Davies CHJ, 'Twinning-induced negative strain rate sensitivity in wrought magnesium alloy AZ31', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 707-710, 2010.
Chun YB, Ahn SH, Shin DH & Hwang SK, 'Grain refinement of vanadium by low temperature severe plastic deformation', Proceedings of the International Conference on Processing and Manufacturing of Advanced Materials, Berlin, Germany, 25-29 August 2009. Materials Science Forum, edited by Chandra T, Wanderka N, Reimers W and Ionescu M, vol 638-642, pp 1934-1939, 2010.
Chun YB, Semiatin SL & Hwang SK, 'Monte-carlo modelling of recrystallization kinetics of cold-rolled titanium', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 1486-1491, 2010.
Couper MJ, 'Selecting the optimum Mg and Si content for 6xxx series extrusion alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp149-154, 2010.
da Costa Teixeira J, Brechet Y, Estrin Y & Hutchinson CR, 'The strain hardening behaviour of supersaturated Al-Cu alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 536-541, 2010.
Dahle AK & Suery M, 'Deformation behaviour of aluminium alloys during solidification', Proceedings of the Solidification and Gravity 2008, Miskolc-Lillafüred, Hungary, 1-4 September 2008. Materials Science Forum, edited by Roosz A, Mertinger V, Barkoczy P and Hoo Cs, vol 649, pp 337-342, 2010.
Dahle AK, 'Nucleation and grain refinement', Proceedings of Solidification and Gravity 2008, Miskolc-Lillafüred, Hungary, 1-4 September 2008. Materials Science Forum, edited by Roosz A, Mertinger V, Barkoczy P and Hoo Cs, vol 649, pp 287-293, 2010.
Gandel DS, Birbilis N, Easton MA & Gibson MA, 'Influence of Manganese, Zirconium and Iron on the corrosion of magnesium', Proceedings of Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 118, 2010.
Han WZ, Vinogradov A & Hutchinson CR, 'Dynamic precipitation during cyclic deformation in under aged Al-4Cu containing θ` (Al2Cu) precipitates', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1015-1020, 2010.
Han WZ, Vinogradov A & Hutchinson CR, 'Evolution of internal stress during cyclic deformation of Al-4Cu as a function of θ` precipitate state', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 2393-2398, 2010.
Kim J, Estrin Y, Beladi H, Kim S, Chin K-G & De Cooman BC, 'Constitutive model of TWIP steel in uni-axial tension', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 270-273, 2010.
Laws KJ, Shamlaye K, Gun B, Wong K & Ferry M, 'The prediction of glass-forming compositions in metallic systems – the development of new bulk metallic glasses', Proceedings of the 6th International Conference on Processing and Manufacturing of Advanced Materials, Berlin, Germany, 25-29 August 2009. Materials Science Forum, edited by Chandra T, Wanderka N, Reimers W and Lonescu M, vol 638-642, pp 1673-1641, 2010.
Lazar S, Etheridge J, Dwyer C, Freitag B & Botton GA, 'Applications of spherical aberration correction in STEM and TEM', Proceedings of the Microscopy & Microanalysis 2010 Meeting, Portland, USA, 1-5 August 2010. Microscopy & Microanalysis, vol 16(S2), pp 68–69, 2010.
Li S, Marceau RKW, Sha G, Poole WJ & Ringer SP, 'Atom probe tomography characterisation of solute clustering in AA6111', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 2213 - 2218, 2010.
Lim J-B, Bettles CJ, Muddle BC & Park N-K, 'Effects of impurity elements on green strength of titanium powder compacts', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 811-814, 2010.
Luo S, Bettles CJ, Yan M, Schaffer GB & Qian M, 'Microwave sintering of titanium', Proceedings of the Symposium on Cost Affordable Titanium III TMS 2010, Seattle, USA, 14-18 February 2010. Key Engineering Materials: Symposium on Cost Affordable Titanium III, edited by Ashraf Iman A and Froes FH, vol 436, pp 141-147, 2010.
Marceau RKW, Ringer SP, da Costa Teixeira J & Hutchinson CR, 'Atom probe study of shear-induced dissolution of GP zones in Al-3Cu alloy', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1373-1378, 2010.
Moutsos S, Pasang T, Muddle BC & Lynch SP, 'The effect of slip mode on brittle intergranular fracture of Al alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 314-321, 2010.
Moy CKS, Bocciarelli M, Ringer SP & Ranzi G, 'A method to extract materials properties from multilayer material systems', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 2775-2778, 2010.
Nagasekhar AV, Caceres CH & Easton M, 'Cross-sectional geometry and the intermetallics structure in a high pressure die cast Mg-Al alloy', Proceedings of the International Conference on Processing and Manufacturing of Advanced Materials, Berlin, Germany, 25-29 August 2009. Materials Science Forum, edited by Chandra T, Wanderka N, Reimers W and Ionescu M, vol 638-642, pp 1579-158, 2010.
Nagasekhar AV, Caceres CH & Easton MA, 'Growth restriction factor effects near the surface of high pressure die cast Mg-Al binary alloys', Proceedings of Magnesium Technology 2010, Seattle, USA, 13-18 February 2010. Magnesium Technology 2010, edited by Agnew SR, Neelameggham NR, Nyberg EA and Sillekens WH, pp 373-376, 2010.
Nakashima PNH, Smith AE, Qiu C & Muddle BC, 'Chemical bonding in aluminium and its influence on precipitates in Al alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1426-1431, 2010.
Otarawanna S, Gourlay CM, Laukli HI & Dahle AK, 'The influence of external mechanical stresses on agglomeration and bending of solidifying crystals', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 1367-1372, 2010.
Qian M, 'Heterogeneous nucleation and grain formation on spherical and flat substrates', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 1339-1342, 2010.
Qiu D & Zhang M-X, 'Inoculation during metal castings: Beyond grain refining', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 671-676, 2010.
Ralston KD & Birbilis N, 'The effect of ECAP and grain size on corrosion resistance of AA2024-T3', Proceedings of Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 95, 2010.
Ralston KD, Fabijanic DJ & Birbilis N, 'Surface modification for enhanced corrosion resistance using Fluid Bed Reactor Chemical Vapour Deposition (FBR-CVD)', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 1956-1959, 2010.
Rinderer B, Couper MJ, Xiong X, Gao X & Nie JF, 'Precipitation sequence in an Al-Si-Mg foundry alloy', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 590-595, 2010.
Ringer SP, 'Processing and properties of cluster strengthened aluminium alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1525-1531, 2010.
Rometsch PA, Cao L & Muddle BC, 'Strengthening of 6xxx series sheet alloys during natural ageing and early-stage artificial ageing', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 389-94, 2010.
Sha G, Liao XZ, Lapovok R & Ringer SP, 'Modification of precipitate microstructure in 6060 Al alloy by equal-channel angular pressing', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 430-434, 2010.
Shen L, Proust G & Ranzi G, 'An atomistic study of dislocation-solute interaction in Mg-Al Alloys', Proceedings of the 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, Sydney, Australia, 19-23 July 2010. IOP Conference Series: Materials Science and Engineering, vol 10, pp 012177, 2010.
Shih JC, Weyland M & Muddle BC, 'Precipitation in a high-strength Al-Cu-Li alloy', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 2028-2033, 2010.
Skripnyuk VM, Rabkin E, Estrin Y & Lapovok R, 'A possible route to making magnesium fit for hydrogen storage in automotive applications', Proceedings of Magnesium Technology 2010, Seattle, USA, 13-18 February 2010. Magnesium Technology 2010, edited by Agnew SR, Neelameggham NR, Nyberg EA and Sillekens WH, pp 15-16, 2010.
Spencer K, Luzin V & Zhang M-X, 'Structure and properties of cold spray coatings', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 1880-1884, 2010.
Strobel K, Easton MA, Sweet ED, Couper MJ & Nie JF, 'Relating quench sensitivity to microstructure in 6xxx series alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1596-1601, 2010.
Strobel K, Sweet ED, Easton M, Nie JF & Couper MJ, 'Dispersoid phases in 6xxx series aluminium alloys', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 926-929, 2010.
Sukiman NL, Birbilis N & Buchheit RG, 'Corrosion maps for aluminium alloys', Proceedings of Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 103, 2010.
Terzi S, Salvo L, Suery M, Dahle A & Boller E, 'In situ microtomography investigation of the microstructural evolution in Al-Cu alloys during holding in the semi-solid state', Proceedings of the 11th International Conference on Semi-Solid Processing of Alloys and Composites, Beijing, China, 16 September 2010. Transactions of Nonferrous Metals Society of China, vol 20, pp s734-s738, 2010.
Terzi S, Taylor JA, Salvo L, Suery M, Boller E & Dahle AK, 'Nucleation and growth dynamics of the α-Al / β-Al5FeSi eutectic in a complex Al-Si-Cu-Fe alloy', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1273-1278, 2010.
Thomas S, Venkatraman MS, Cole IS & Birbilis N, 'Electrochemical performance of zinc in acidic chloride solutions', Proceedings of the Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 96, 2010.
Tomus D, Qian M, Yu P, Brice CA, Bettles CJ & Muddle BC, 'Microstructural characterisation of electron beam processed Al-2Sc', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 910-913, 2010.
Xia K, Xu W, Wu X, Goussous S, Lui E & Wu YS, 'Powder consolidation by severe plastic deformation and its applications in processing ultrafine and nanostructured aluminium and composites', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1141-1146, 2010.
Xiong X, Moutsos S, King R & Muddle BC, 'Quantitative analysis of precipitate compositions in an Al-Li-Mg-Cu alloy using atom probe tomography', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-56, pp 914-917, 2010.
Xu D, Rometsch PA, Chen H & Muddle BC, 'Influence of solution treatment on microstructure and quench cracking in a water-quenched 7150 aluminium alloy', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 934-937, 2010.
Xu D, Rometsch PA, Chen H, Gao X & Muddle BC, 'Effect of solution treatment on microstructure and mechanical properties of thick plate aluminium alloy 7150', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 1101-1106, 2010.
Yang K, Nagasekhar AV & Caceres CH, 'Section thickness and the skin effect in a high pressure die cast Mg-12%Al alloy', Proceedings of Magnesium Technology 2010, Seattle, USA, 13-18 February 2010. Magnesium Technology 2010, edited by Agnew SR, Neelameggham NR, Nyberg EA and Sillekens WH, pp 391-394, 2010.
Yang K, Nagasekhar AV, Caceres CH & Easton MA, 'The skin effect in an Mg-RE high pressure die cast alloy', Proceedings of the 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010. Materials Science Forum, edited by Nie JF and Morton A, vol 654-656, pp 691-694, 2010.
Yang K, Nagasekhar AV, Lumley RN & Caceres CH, 'The skin effect in high pressure die casting Al alloys', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 687-692, 2010.
Zhong H, Rometsch PA, Cao L, Guo F & Muddle BC, 'Tensile properties and work hardening behaviour of alloy 6016 in naturally aged and pre-aged conditions', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 2203-2208, 2010.
Zhong H, Rometsch PA, Cao L, Guo F & Muddle BC, 'Tensile properties and work hardening behaviour of alloy 6016 in naturally aged and pre-aged conditions', Proceedings of the 12th International Conference on Aluminium Alloys, Yokohama, Japan, 5-9 September 2010. ICAA12 Proceedings, edited by Kumai S, Umezawa O, Takayama Y, Tsuchida T and Sato T, pp 2203-2208, 2010.
Zhou X, Birbilis N & Macdonald DD, 'Kinetic stability of aluminium', Proceedings of the Corrosion and Prevention 2010, Adelaide, Australia, 14-17 November 2010. Corrosion & Prevention 2010 Conference Proceedings, edited by Ackland B, Ali M et al, paper 102, 2010.
Al-Salihi H, Bettles C & Muddle BC, 'The Ageing Behavior of Titanium Alloy Ti-10V-2Fe-3Al', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Birbilis N, 'Towards Stainless Magnesium', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Chun YB & Davies CHJ, 'Twinning-induced negative strain rate sensitivity in wrought Mg alloy AZ31', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Dwyer C, Weyland M & Muddle BC, 'Structure and formation of T1 phase in Al-Cu-Li alloys', PTM 2010 Solid-Solid Phase Transformations in Inorganic Materials, Avignon, France, 6-11 June 2010.
Estrin Y, 'Some new developments in titanium-based bioimplants', 2010 Asian Forum on Light Metals, Guilin, China, 26-29 October 2010.
Etheridge J, Lazar S, Dwyer C & Botton G, 'Atomic resolution imaging of the electron probe after scattering from a crystal', 17th International Microscopy Congress, Rio De Janeiro, Brazil, 19-24 September 2010.
Ferry M, 'The design of new light alloy bulk metallic glass compositions suitable for various end applications', 2010 Asian Forum on Light Metals, Guilin, China, 26-29 October 2010.
Ghaderi A & Barnett MR, 'Comparing deformation twinning activity in titanium and magnesium', Institute for Technology Research and Innovation Annual Conference, Geelong, Australia, 1-2 November 2010.
Goussous S, Xu W & Xia K, 'Mechanical properties in Al-based nanocomposites through severe plastic deformation', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Guo W, Zakaria Quadir MD, Eddowes T, Lay M, Moricca S, Hill A & Ferry M, 'Production and properties of a multifunctional titanium alloy', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Hoffman M, Vodenitcharova T, Kabir KR & Idris MI, 'Localised contact and impact effects on aluminium foams and laminates', 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010.
Kong C, Munroe P, Nagasekhar AV & Caceres CH, 'A Site Specific TEM-EDS Study of the α/β-phase Boundary in High Pressure Die Cast AZ91 Alloy'. 21st Australian Conference on Microscopy and Microanalysis, Brisbane, Australia, 11-15 July 2010.
Kong Y, Shen L, Proust G & Ranzi G, 'Atomic behaviour of the nanolayered Al/Pd thin films', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Low R, Qian M & Schaffer GB, 'A mechanism for surface densification in sintered titanium powder compacts', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Lui E, Xu W, Wu X & Xia K, 'Multi-scale structured dual-phase Ti-Al with high strength and plasticity', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Luo SD, Schaffer GB & Qian M, 'Characteristics of microwave sintering as a novel fabrication technique for titanium', 4th Australian Joint Strike Fighter Advanced Technology and Innovation Conference, Melbourne, Australia, 3-5 May 2010.
Luo SD, Yang Y, Schaffer GB & Qian M, 'Microwave sintering of titanium and its alloys in vacuum', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Marceau RKW, Qiu C, Ringer SP & Hutchinson CR, 'An EPMA and APT study of the composition dependence of the rapid hardening behaviour in Al-Cu-Mg alloys using diffusion couples', 21st Australian Conference on Microscopy and Microanalysis, Brisbane, Australia, 11-15 July 2010.
Marceau RKW, Sha G & Ringer SP, 'Quantitative atom probe tomography analysis of solute clusters formed during early rapid hardening in Al-Cu-Mg alloys', PTM 2010 International Conference on Solid-Solid Phase Transformations in Inorganic Materials, Avignon, France, 6-11 June 2010.
Marceau RKW, Stephenson LT, Hutchinson CR & Ringer SP, 'Atom probe study of an Al-Cu Alloy containing clusters and a bimodal precipitate size distribution: Quantitative characterisation across multiple length scales', 52nd International Field Emission Symposium, Sydney, Australia, 5-8 July 2010.
Maunders C, Dwyer C & Etheridge J, 'Measurement of spatial coherence in a transmission electron microscope', 21st Australian Conference on Microscopy and Microanalysis, Brisbane, Australia, 11-15 July 2010.
Moy C, Bocciarelli M, Ringer S & Ranzi G, 'Identification of mechanical material properties by means of an inverse analysis technique using indentation experimental results', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Nakashima P, Smith A, Etheridge J & Muddle BC, 'Chemical bonds in aluminium – Tetrahedra, Octahedra or Bridges?', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Nakashima PNH, Smith AE, Qiu C & Muddle BC, 'Calibrating solid state theory with experimental measurements of bonding charge density – A study of aluminium', PTM 2010 Solid-Solid Phase Transformations in Inorganic Materials, Avignon, France, 6-11 June 2010.
Qian M, 'Challenges and opportunities for near-net shape fabrication of titanium alloys and titanium matrix composites from powder', Chinese Academy of Sciences Advanced Materials Symposium, Taiyuan, China, 9-11 August 2010.
Qian M, 'From powder to parts: An anticipated titanium business for Australia', CAST-CRC Annual Conference, Creswick, Victoria, Australia, 19-22 September 2010.
Qian M, 'Heterogeneous nucleation on spherical and flat catalysing surfaces', Symposium on Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids, TMS 139th Annual Meeting & Exhibition, Seattle, USA, 14-18 February 2010.
Qian M, Luo SD, Yang YF & Schaffer GB, 'Cold compaction and sintering of CP titanium and commercially important titanium alloys', 2010 Asian Forum on Light Metals, Guilin, China, 26-29 October 2010.
Qian M, Tomus D, Bettles CJ, Brice CA & Muddle BC, 'Light Alloy Design for Electron Beam Direct Manufacturing', 4th Australian Joint Strike Fighter Advanced Technology and Innovation Conference, Melbourne, Australia, 3-5 May, 2010.
Quan L, Gao X & Muddle BC, 'Effect of pre-stretching on an aged AA2524 alloy', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Ralston K, Davies CHJ & Birbilis N, 'The relationship between the grain size and corrosion rate of metals', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Ringer SP, 'Recent advances in atom probe microscopy and TEM: Enabling light alloy design', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Rometsch PA, Cao L, Xiong XY & Muddle BC, 'Atom probe analysis of early-stage strengthening behaviour in an Al-Mg-Si-Cu alloy', 52nd International Field Emission Symposium, Sydney, Australia, 5-8 July 2010.
Sha G, Marceau RKW, Gao X, Gun B, Quan LW, Muddle BC & Ringer SP, 'Nanostructure of Aluminium Alloy 2024: Segregation, Clustering and Precipitation Process', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Sha G, Gao X, Gun B, Marceau RKW, Quan LW, Muddle BC & Ringer SP, 'On the nanoscale microstructure of 2024 Al alloy', 52nd International Field Emission Symposium, Sydney, Australia, 5-8 July 2010.
Sha G, Liao XZ, Lapovok R, Valiev RZ, Langdon TG & Ringer SP, 'Atom probe tomography: A new insight into the partition and segregation of solutes in ultrafine-grained and nanocrystalline Al alloys', Ultrafine Grained Materials VI, TMS 139th Annual Meeting & Exhibition, Seattle, USA, 14-18 February 2010.
Sha G, Marceau RKW, Gao X, Gun B, Quan LW, Muddle BC & Ringer SP, 'Nanostructure of aluminium alloy 2024: Segregation, clustering and precipitation process', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Shahzad N, Cole I, Ralston K & Muddle BC, 'A novel high-throughput test methodology for atmospheric corrosion', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Shi Z & Atrens A, 'An innovative specimen configuration for the study of Mg corrosion', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Shih J, Weyland M & Muddle BC, 'Precipitation in a high-strength Al-Cu-Li alloy', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Siska F & Barnett M, 'Finite element modelling of twinning in magnesium', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Spencer K, Wang Q, Luzin V & Zhang M-X, 'Kinetic metallization – An effective surface coating technology', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
StJohn D, Qian M & Easton M, 'Grain formation: The interdependence between grain growth and nucleation', Symposium on Heterogeneous Nucleation and Initial Microstructure Evolution in Alloys and Colloids, TMS 139th Annual Meeting & Exhibition, Seattle, USA, 14-18 February 2010.
Sukiman N, Birbilis N & Buchheit R, 'Mapping the corrosion space of aluminium alloys', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Tang GCH, Hoffman M, Yan J, Zakaria Quadir MD & Lapovok R, 'Cyclic fatigue crack growth in ultrafine grained aluminium', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Terzi S, Salvo L, Suéry M, Boller E & Dahle A, 'Control and characterisation of nucleation in liquids and solids', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Thomas S, Birbilis N, Cole I & Venkatraman M, 'Self-repairing oxides to protect zinc', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Tomus D, Easton M & De Looze G, 'The influence of Be, Mn and SiC on grain size refinement of Mg-Al alloys', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Tomus D, Qian M, Brice C & Muddle BC, 'Electron beam processing of Al–2Sc alloy for enhanced precipitation hardening', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Wang L, Xu D, Rometsch P, Gao X, Zhang Y, He Z & Muddle BC, 'Effect of homogenisation parameters on dissolution and precipitation in AA7150', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Wang Q, Spencer K, Birbilis N & Zhang M-X, 'The influence of ceramic particles on bond strength of cold spray composite coatings on AZ91 alloy substrate', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Wu X, Xu W, Luo SD, Qian M & Xia K, 'Deformation behaviour of Ti-3Cu-1Si during isothermal forging', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Xu W, Robin L, Zheng R, Laws K & Ferry M, 'The phase redistribution during deformation in the supercooled liquid region and its effect on mechanical property in an in-situ Mg-based bulk metallic glass composite', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Xu W, Wu X, Figueiredo R, Pauly S, Stoica M, Eckert J, Langdon T & Xia K, 'Intrinsically ductile nanocrystalline BCC beta titanium alloy', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Yang K, Caceres C, Nagasekhar AV & Easton M, 'Strain hardening behaviour of HPDC Mg-Al alloys at low strains', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Yang KV, Caceres CH, Nagasekhar AV & Easton M, 'Length scales and strain hardening behaviour of high-pressure diecast Mg-Al alloys', 5th World Congress on Engineering Asset Management, Brisbane, Australia, 25-27 October 2010.
Yang Y, Luo SD, Schaffer GB & Qian M, 'Sintering of Ti-10V-2Fe-3Al compacted from titanium and master alloy powder blends', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Yao Y, Chan S & Standard O, 'Improved powder metallurgy fabrication route for aluminium matrix composites', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Zhou X, Birbilis N & Macdonald D, 'Kinetic stability of aluminium', 5th Annual Workshop of the ARC Centre of Excellence for Design in Light Metals, Sydney, Australia, 30 November-1 December 2010.
Zhu YM, Morton AJ & Nie JF, 'Characterisation of microstructures in Mg-Y-Zn alloys', 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2-6 August 2010.
Zhu YM, Oh-ishi K, Hono K, Morton AJ & Nie JF, 'Study of nano-thickness precipitates in Mg-Y-Zn based alloys by HAADF-STEM and 3DAP', 21st Australian Conference on Microscopy and Microanalysis, Brisbane, Australia, 11-15 July 2010.