Barnett MR, Jacob S, Gerard BF, Mullins JG, 'Necking and failure at low strains in a coarse-grained wrought Mg alloy', Scripta Materialia, 59(10), 1035-1038, 2008.
Barnett MR, Keshavarz Z, Beer AG, Ma X, 'Non-Schmid behaviour during secondary twinning in a polycrystalline magnesium alloy', Acta Materialia, 56(1), 5-15, 2008.
Bender S, Goellner J, Atrens A, 'A Study of the Corrosion of AZ91 in 1N NaCl and the Mechanism of Magnesium Corrosion', Advanced Engineering Materials, 10, 583-587, 2008.
Bettles CJ, Gibson MA, Zhu S, 'Microstructure and Mechanical Behaviour of an Elevated Temperature Mg-Rare Earth Based Alloy', Materials Science & Engineering A, DOI 10.1016/j.msea.2008.11.004, in press.
Bettles CJ, 'Magnesium Powder Metallurgy: Process and Materials Opportunities, Journal of Materials Engineering & Performance, 17(3), 297-301, 2008.
Birbilis N, Buchheit RG, 'Electrochemical characteristics for intermetallic phases common to aluminum alloys as a function of solution pH', Journal of the. Electrochemical Society, 155 (3), C117-C126, 2008.
Birbilis N, Buchheit RG, 'Measurement and discussion of low temperature hot corrosion damage accumulation upon Ni-based superalloy Rene 104', Metallurgical and Materials Transactions A, 39A, 3224-3232, 2008.
Birbilis N, Cavanaugh MK, Buchheit RG, 'Predicting corrosion damage from microstructure in a deterministic sense: A first order example for aluminium alloy 7075-T651', Corrosion and Materials, 33(5), 14-22, 2008.
Birbilis N, Cavanaugh MK, Kovarik L, Buchheit RG, 'Nanoscale dissolution phenomena in Al-Cu-Mg alloys', Electrochemistry Communications, 10, 32-37, 2008.
Bobby Kannan M, Dietzel W, Blawert C, Atrens A, Lyon P, 'Stress corrosion cracking of rare-earth-containing magnesium alloys ZE41, QE22, and Elektron 21 (EV31A) compared with AZ80', Materials Science & Engineering A, 480, 529-539, 2008.
Borrero-López O, Hoffman M, Bendavid A, Martin PJ, 'A Simple Nanoindentation-Based Methodology to Assess the Strength of Sub-Micron Films', Acta Materialia, 56, 1633-1641, 2008.
Brokmeier HG, Gan W, Zheng M, Zuberova Z, Estrin Y, 'Development of extrusion and rolling textures during ECAP of Mg alloys', Materials Science Forum, 584-586, 748-753, 2008.
Burgess T, Ferry M, Laws KJ, 'Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation', Acta Materialia, 56, 4829-4835, 2008.
Cáceres CH, Lukác P and Blake A, 'Strain Hardening due to Twinning in Pure Magnesium', Philosophical Magazine A, 88, 991-1003, 2008.
Cáceres CH, Lukác P, 'Strain Hardening Behaviour and the Taylor Factor of Pure Magnesium', Philosophical Magazine A, 88, 977-989, 2008.
Cáceres CH, 'Transient Environmental Effects of Light Alloy Substitutions in Transport Vehicles', Journal of Materials and Design, http://dx.doi.org/10.1016/j.matdes.2009.01.027, in press.
Ceguerra AV, Moody MP, Cairney JM, Jahedi M, Ringer SP, 'Preliminary interface characterisation of cold sprayed copper on aluminium', Materials Forum, 32, 116-120, 2008.
Chang H, Zhang M, 'Packed Powder Diffusion Coating of Pure Aluminium after Surface Nanocrystallization', International Journal of Surface Science and Engineering, accepted.
Chang JW, Peng LM, Guo XW, Atrens A, Fu PH, Ding WJ, Wang XS, 'Comparison of the corrosion behaviour in 5% NaCl solution of Mg alloys NZ30K and AZ91D', Journal of Applied Electrochemistry, 38(2), 207-214, 2008.
Cho YH, Oh KH, Lee HC, Dahle AK, 'Effect of strontium and phosphorous on eutectic nucleation and formation of β-Al5FeSi in hypoeutectic Al-Si foundry alloys', Metallurgical and Materials Transactions A, 39A(10), 2435-2448, 2008.
Cizek P, Barnett MR, 'Characteristics of the contraction twins formed close to the fracture surface in Mg-3Al-1Zn alloy deformed in tension', Scripta Materialia, 59(9), 959-962, 2008.
Da Costa Teixeira J, Cram DG, Bastow TJ, Hill AJ, Hutchinson CR, 'On the Strengthening Response of Aluminium Alloys Containing Shear-Resistant Plate Shaped Precipitates', Acta Materialia, 56, 6109-6122, 2008.
Dargusch M, Zhang M, Palanisamy S, Buddery A, StJohn D, 'Subsurface Deformation After Dry Machining of Grade 2 Titanium', Advanced Engineering Materials, 10, 85-88, 2008.
Dobatkin SV, Estrin Y, Rokhlin LL, Popov MV, Lapovok R, Dobatkina TV, Timofeev VN, Nikitina NI, 'Structure and Properties of Mg-Al-Ca Alloy after Severe Plastic Deformation', Materials Science Forum, 584-586, 559-564, 2008.
Eckert J, Das J, Xu W, Theissmann R, 'Nanoscale mechanism and intrinsic structure related deformation of Ti-alloys', Materials Science & Engineering A, A493, 71-78, 2008.
Estrin Y, Fomenko LS, Lubenets SV, Shumilin SE, Pustovalov VV, 'Investigation of structural inhomogeneity and low-temperature micromechanical properties of ultrafine grained aluminium' (in Russian), Fizika Nizkikh Temperatur (Low Temperature Physics), 34, 975-982, 2008.
Estrin Y, Isaev NV, Grigorova TV, Pustovalov VV, Fomenko VS, Shumilin SE, Braude IS, Malykhin SV, Reshetnyak MV, Janecek M, 'Low-temperature plastic deformation of ultrafine-grained aluminum, (in Russian), Fizika Nizkikh Temperatur (Low Temperature Physics), 34, 842–851, 2008.
Estrin Y, Kasper C, Diederichs S, Lapovok R, 'Accelerated growth of preosteoblastic cells on ultrafine grained titanium', Journal of Biomedical Materials Research A, published online 31 July 2008: http://dx.doi.org/10.1002/jbm.a.32174
Estrin Y, Molotnikov A, Davies CHJ, Lapovok R, 'Strain Gradient Plasticity Modelling of High Pressure Torsion', Journal of the Mechanics and Physics of Solids, 56, 1186-1202, 2008.
Estrin Y, Yi SB, Brokmeier HG, Zuberova Z, Yoon SC, Kim HS, Hellmig RJ, 'Microstructure, texture and mechanical properties of the magnesium alloy AZ31', International Journal of Materials Research, 99, 50-55, 2008.
Fu H, Qiu D, Zhang M, Wang H, Kelly P, Taylor J, 'The Development of New Grain Refiner for Pure Magnesium using Edge-to- Edge Model', Journal of Alloys and Compounds, 456, 390-395, 2008.
Fu H, Zhang M, Qiu D, Kelly P, Taylor J, 'Grain refinement by AlN Particles in Mg-Al Based Alloys', Journal of Alloys and Compounds, 2009, doi:10.1016/j.jallcom.2008.12.029, accepted.
Gao X, Nie JF, 'Enhanced Precipitation Hardening in Mg-Gd-Zn Alloys Containing Ag and Zn', Scripta Materialia, 58, 619-22, 2008.
Gault B, de Geuser F, Stephenson LT, Moody MP, Muddle BC, Ringer SP, 'Estimation of the Reconstruction Parameters for Atom Probe Tomography', Microscopy and Microanalysis, 14, 296-305, 2008.
Gourlay CM, Meylan B, Dahle AK, 'Shear mechanisms at 0-50% solid during equiaxed dendritic solidification of an AZ91 magnesium alloy', Acta Materialia, 56(14), 3403-3413, 2008.
Gourlay CM, Otarawanna S, Laukli HI, Dahle AK, 'An Overview of Defect Bands in High Pressure Die Castings', Die Casting Engineer, 52(1), 32-35, 2008.
Gourlay CM, Otarawanna S, Meylan B, Dahle AK, 'Reynolds' dilatancy and shear bands in semi-solid alloys', Solid State Phenomena, 141-143, 337-343, 2008.
Gourlay CM, Read J, Nogita K, Dahle AK, 'The maximum fluidity length of solidifying Sn-Cu-Ag-Ni solder alloys', Journal of Electronic Materials, 37(1), 51-60, 2008.
Haley D, Petersen T, Barton G, Ringer SP, 'Influence of field evaporation on Radial Distribution Functions in Atom Probe Tomography', Philosophical Magazine, accepted on 14 Dec 2008.
Haq A, Munroe P, Hoffman M, Martin P, Bendavid A, 'Berkovich Indentation of Diamond-like Carbon Coatings on Silicon Substrates', Journal of Materials Research, 23(7), 1862-1869, 2008.
Hasani A, Lapovok R, Tóth LS, Molinari A, 'Deformation field variations in ECAE due to back pressure', Scripta Materialia, 58(9), 771-774, 2008.
Hellmig RJ, Janecek M, Hadzima B, Gendelman OV, Shapiro M, Molodova X, Springer A, Estrin Y, 'A Portrait of Copper Processed by Equal Channel Angular Pressing', Materials Transactions, 49, 31-37, 2008.
Holbig E, Dubrovinsky LS, Swamy V, Wirth R, Prakapenka V, Kuznetsov A, 'Stiffening behavior of nanoscale anatase Ti0.9Zr0.1O2’, Journal of Physics and Chemistry of Solids, 69, 2230-2233, 2008.
Kang M, Zhang M, Liu F, Zhu M, 'Kinetics and Morphology of Isothermal Transformations at Intermediate Temperature in 15CrMnMoV Steel', Materials Transactions, 50, 123-129, 2008.
Kashef S, Asgari SA, Hodgson PD, Yan W, 'Simulation of Three-point Bending Test of Titanium Foam for Biomedical Applications', Advanced Materials Research, 32, 237-240, 2008.
Khaidarov R, Khaidarov R, Gapurova O, Estrin Y, Scheper T, 'Electrochemical Method of Synthesis of Silver Nanoparticles', Journal of Nanoparticle Research, DOI 10.1007/s11051-008-9513-x, in press.
Kim HS, Estrin Y, 'Strength and strain hardening in nanocrystalline materials', Materials Science & Engineering A, 483-484, 127-130, 2008.
Kubota M, Cizek P, Rainforth WM, 'Properties of mechanically milled and spark plasma sintered Al-15at.% MgB2 composite materials', Composites Science and Technology, 68, 888-895, 2008.
Lapovok R, Estrin Y, Popov MV, Langdon TG, 'Enhanced Superplasticity in a Magnesium Alloy Processed by Equal-Channel Angular Pressing with a Back-Pressure', Advanced Engineering Materials, 10(5), 429-433, 2008.
Lapovok R, Estrin Y, Popov MV, Rundell S, Williams T, 'Enhanced Superplasticity of Magnesium Alloy AZ31 Obtained through Equal-Channel Angular Pressing with Back-Pressure', Journal of Materials Science, 43(23-24), 7372-7378, 2008.
Lapovok R, Timokhina I, McKenzie PWJ, O'Donnell R, 'Processing and Properties of Ultrafine-Grain Aluminum Alloy 6111 Sheet', Journal of Materials Processing Technology, 200(1-3), 441-450, 2008.
Lapovok R, Tomus D, Bettles C, 'Deformation with imposed hydrostatic pressure for enhanced compaction of powder', Scripta Materialia, 58(10), 898-901, 2008.
Lapovok R, Tomus D, Bettles C, 'Shear Deformation With Imposed Hydrostatic Pressure For Enhanced Compaction Of Powder', Scripta Materialia, 58(10), 898-901, 2008.
Lapovok R, Tomus D, Muddle BC, 'Low-temperature compaction of Ti-6Al-4V powder using equal channel angular extrusion with back-pressure', Materials Science & Engineering A, 490(1-2), 171-180, 2008.
Lapovok R, Tóth LS, Molinari A, Estrin Y, 'Strain localisation patterns under Equal Channel Angular Pressing', Journal of the Mechanics and Physics of Solids, published online 14 October 2008: http://dx.doi.org/10.1016/j.jmps.2008.09.012
Laws KJ, Gun B, Ferry M, 'Large-scale production of Ca-base bulk metallic glass samples by low pressure die casting', Materials Science & Engineering A, 475, 348-354, 2008.
Laws KJ, Gun B, Ferry M, 'Mechanical stability of Ca65Mg15Zn20 bulk metallic glass during deformation in the supercooled liquid region', Materials Science & Engineering A, 480, 198-204, 2008.
Liu M, Qiu D, Zhao MC, Song G, Atrens A, 'The effect of crystallographic orientation on the active corrosion of pure magnesium', Scripta Materialia, 58, 421-424, 2008.
Liu M, Uggowitzer PJ, Nagasekhar AV, Schmutz P, Easton M, Song GL, Atrens A, 'Calculated phase diagrams and the corrosion of die-cast Mg-Al alloys', Corrosion Science, accepted on Dec 2008.
Liu M, Uggowitzer PJ, Schmutz P, Atrens A, 'Calculated phase diagrams, Iron tolerance limit and corrosion of Mg-Al alloys', JOM, 60(12), 39-44, 2008.
Liu ZY, Sercombe TB, Schaffer GB, 'Metal injection moulding of aluminium alloy 6061 with tin', Powder Metallurgy, 51, 78-83, 2008.
Molotnikov A, Lapovok R, Davies CHJ, Cao W, Estrin Y, 'Size Effect on the Tensile Strength of Fine-Grained Copper', Scripta Materialia, 59(11), 1182-1185, 2008.
Moody MP, Stephenson LT, Ceguerra AV, Ringer SP, 'Quantitative binomial distribution analyses of nanoscale like-solute atom clustering and segregation in atom probe tomography data', Microscopy Research and Technique, 71(7), 542-550, 2008.
Muránsky O, Carr DG, Barnett MR, Oliver EC, Sittner P, 'Investigation of deformation mechanisms involved in the plasticity of AZ31 Mg alloy: In situ neutron diffraction and EPSC modelling', Materials Science and Engineering A, 496(1-2), 14-24, 2008.
Nagasekhar AV, 'Applicability of equal channel angular pressing (ECAP) processing to light metals', Materials Australia, 41, pp 38, May 2008.
Nagasekhar AV, Kim HS, 'Analysis of the T shaped equal channel angular pressing using the finite element method', Metals and Materials International, 14(5), 565-568, 2008.
Nagasekhar AV, Kim HS, 'Plastic deformation characteristics of cross-equal channel angular pressing', Computational Materials Science, 43, 1069-1073, 2008.
Nie JF, Muddle BC, 'Strengthening of an Al-Cu-Sn Alloy by Deformation-Resistant Precipitate Plates', Acta Materialia, 56, 3490-501, 2008.
Nogita K, Gourlay CM, Read J, Nishimura T, Suenaga S, Dahle AK, 'Effects of Phosphorus on Microstructure and Fluidity of Sn-0.7Cu-0.05Ni Lead-Free Solder', Materials Transactions, 49(3), 443-448, 2008.
Op't Hoog C, Birbilis N, Estrin Y, 'Corrosion of Pure Mg as a Function of Grain Size and Processing Route', Advanced Engineering Materials, 10, 579 - 582, 2008.
Op't Hoog C, Birbilis N, Zhang M, Estrin Y, 'Surface grain size effects on the corrosion of magnesium', Key Engineering Materials, 384, 229-240, 2008.
Peng LM, Chang JW, Guo XW, Atrens A, Ding WJ, Peng YH, 'Influence of heat treatment and microstructure on the corrosion of magnesium alloy Mg-10Gd-3Y-0.4Zr', Journal of Applied Electrochemistry, accepted for publication, Nov 2008
Pojprapai S, Jones JL, Studer A, Russell J, Valanoor N, Hoffman M, 'Ferroelastic domain switching fatigue in lead zirconate titanate ceramics', Acta Materialia, 56, 1577-1587, 2008.
Quadir MZ, Ferry M, Al-Buhamad O, Bassman L, 'Randomization of recrystallization textures in Al layers by intense shearing in a layered ARB sheet of Al and Al(0.3%Sc)', Acta Materialia, 57, 29-40, 2008.
Quadir MZ, Wolz A, Hoffman M, Ferry M, 'Influence of processing parameters on the bond toughness of roll-bonded aluminium strip', Scripta Materialia, 58, 959-962, 2008.
Ribbe J, Schmitz G, Amouyal Y, Estrin Y, Divinski SV, 'Grain boundary radiotracer diffusion of Ni in ultra-fine grained Cu and Cu-1wt.% Pb alloy produced by equal channel angular pressing', Materials Science Forum, 584-586, 380-386, 2008.
Ringer SP, Prasad KS, Quan GC, 'Internal co-precipitation in aged Al-1.7Cu-0.3Mg-0.1Ge(at%) alloy', Acta Materialia, 56, 1933-1941, 2008.
Ringer SP, Sofyan BT, Prasad KS, Quan GC, 'Precipitation reactions in Al-4.0Cu-0.3Mg (wt%) alloy', Acta Materialia, 56, 2147-2160, 2008.
Robertson IM, Schaffer GB, 'Suitability of nickel as alloying element in titanium sintered in solid state', Powder Metallurgy, accepted.
Robertson IM, Schaffer GB, 'Swelling during liquid phase sintering of Ti-Ni alloys', Powder Metallurgy, accepted.
Sabirov I, Estrin Y, Barnett M, Timokhina I, Hodgson PD, 'Deformation behaviour of an ultra-fine grained Al6082 alloy’, Materials Science Forum, 584-586, 703-707, 2008.
Sabirov I, Estrin Y, Barnett M, Timokhina I, Hodgson PD, 'Enhanced tensile ductility of an ultra-fine-grained aluminum alloy', Scripta Materialia, 58, 163-166, 2008.
Sabirov I, Estrin Y, Barnett M, Timokhina I, Hodgson PD, 'Tensile deformation of an ultrafine-grained aluminium alloy: Micro shear banding and grain boundary sliding', Acta Materialia, 56(10), 2223-2230, 2008.
Safi-Naqvi SH, Hutchinson WB, Barnett MR, 'Texture and mechanical anisotropy in three extruded magnesium alloys', Materials Science and Technology, 24(10), 1283-1292, 2008.
Samat N, Whittle A, Hoffman M, 'The frequency effects on fatigue threshold of PVC-M and PVC-U in air and water medium', Advanced Materials Research, 41-42, 183-187, 2008.
Schaare S, Dyskin AV, Estrin Y, Arndt S, Pasternak E, Kanel-Belov A, 'Point loading of assemblies of interlocked cube-shaped elements', International Journal of Engineering Science, 46, 1228-1238, 2008.
Schaffer PL, Dahle AK, 'The Effect of Degassing on Grain Refinement in Commercial Purity Aluminium', Metallurgical and Materials Transactions A, accepted on 3 October 2008.
Serebryany VN, Popov MV, Gordeev AS, Timofeev VN, Rokhlin LL, Estrin Y, Dobatkin SV, 'Effect of Texture and Microstructure on Ductility of a Mg-Al-Ca Alloy Processed by Equal Channel Angular Pressing', Materials Science Forum, 584-586, 375-379, 2008.
Sha G, Ringer SP, 'Effect of laser pulsing on the composition measurement of an Al-Mg-Si-Cu alloy using three-dimensional atom probe', Ultramicroscopy, http://dx.doi.org/10.1016/j.ultramic.2008.10.012, in press.
Singh RK, Munroe PR, Hoffman M, 'Effect of temperature on metastable phases induced in silicon during nanoindentation', Journal of Materials Research, 23(1), 245-249, 2008.
Singh RK, Tilbrook MT, Xie ZH, Bendavid A, Martin P, Munroe PR, Hoffman M, 'Contact Damage Evolution in Diamond-like Carbon Coatings on Ductile Substrates', Journal of Materials Research, 23, 27-36, 2008.
Spencer K, Zhang M, 'The Emergence of Cold Spray as a Tool for Surface Modification', Key Engineering Materials, 384, 61-74, 2008.
Stanford N, Atwell D, Beer A, Davies C, Barnett MR, 'Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys'. Scripta Materialia, 59(7), 772-775, 2008.
Stanford N, Barnett MR, 'Effect of composition on the texture and deformation behaviour of wrought Mg alloys', Scripta Materialia, 58, 179-182, 2008.
Stanford N, Barnett MR, 'Fine grained AZ31 produced by conventional thermo-mechanical processing', Journal of Alloys and Compounds, 466(1-2), 182-188, 2008.
Stanford N, Barnett MR, 'The origin of "rare earth" texture development in extruded Mg-based alloys and its effect on tensile ductility', Materials Science & Engineering A, 496, 399-408, 2008.
Stanford N, Carlson U, Barnett MR, 'Deformation twinning and the Hall-Petch relation in commercial purity Ti', Metallurgical and Materials Transactions A, 39A, 934-944, 2008.
Stanford N, 'Observation of twinning in a Mg-based alloy', Philosophical Magazine Letters, 88(5), 379-386, 2008.
Südholz AD, Birbilis N, Bettles CJ, Gibson MA, 'Corrosion behaviour of Mg-alloy AZ91E with atypical alloying additions', Journal of Alloys and Compounds, doi:10.1016/j.jallcom.2008.03.128, in press.
Sun H, Shi Y, Zhang M, Lu K, 'Surface Alloying of an Mg Alloy Subjected to Surface Mechanical Attrition Treatment', Surface & Coatings Technology, 202, 3947-2953, 2008.
Sun H, Shi Y, Zhang M, 'Wear Behaviour of AZ91D Magnesium Alloy with a Nanocrystalline Surface Layer', Surface & Coatings Technology, 202, 2859-2864, 2008.
Swamy V, Holbig E, Dubrovinsky LS, Prakapenka V, Muddle BC, 'Mechanical properties of bulk and nanoscale TiO2 phases', Journal of Physics and Chemistry of Solids, 69, 2332-2335, 2008.
Swamy V, Muddle BC, 'Pressure-induced polyamorphic transition in nanoscale TiO2', Journal of Australian Ceramic Society, 44, 1-5, 2008.
Swamy V, 'Size-dependent modifications of the first-order Raman spectra of nanostructured rutile TiO2', Physical Review B, 77, 195414, 2008.
Ventura T, Gourlay CM, Nogita K, Nishimura T, Rappaz M, Dahle AK, 'The Influence of 0-0.1 wt.% Ni on the Microstructure and Fluidity Length of Sn-0.7wt%Cu-xNi', Journal of Electronic Materials, 37(1), 32-39, 2008.
Wang H, Estrin Y, Zuberova Z, 'Bio-corrosion of a magnesium alloy with different processing histories', Materials Letters, 62, 2476-2479, 2008.
Winzer N, Atrens A, Dietzel W, Raja VS, Song G, Kainer KU, 'Characterisation of Stress Corrosion Cracking (SCC) of Mg-Al Alloys', Materials Science and Engineering A, 488, 339-351, 2008.
Winzer N, Atrens A, Dietzel W, Song G, Kainer KU, 'Comparison of the Linearly Increasing Stress Test and the Constant Extension Rate Test in the Evaluation of Transgranular Stress Corrosion Cracking of Magnesium', Materials Science & Engineering A, 472, 97-106, 2008.
Winzer N, Atrens A, Dietzel W, Song G, Kainer KU, 'Stress Corrosion Cracking (SCC) in Mg-Al Alloys Studied using Compact Specimens', Advanced Engineering Materials, 10, 453-458, 2008.
Winzer N, Atrens A, Dietzel W, Song G, Kainer KU, 'Fractography of Stress Corrosion Cracking of Mg-Al Alloys', Metallurgical and Materials Transactions A, 39A(5), 1157-1173, 2008.
Wu G, Fan Y, Atrens A, Zhai C, Ding W, 'Electrochemical behavior of magnesium alloys AZ91D, AZCe2, and AZLa1 in chloride and sulfate solutions', Journal of Applied Electrochemistry, 38, 251-257, 2008.
Wu X, Xu W, Xia K, 'Pure Aluminum with Different Grain Size Distributions by Consolidation of Particles Using Equal Channel Angular Pressing with Back Pressure', Materials Science & Engineering A, A493, 241-245, 2008.
Xia K, 'Bulk Ultrafine and Nanostructured Materials from Consolidation of Particles by Severe Plastic Deformation', Materials Science Forum, 579, 61-74, 2008.
Xie HW, Li YC, Yang DK, Hodgson PD, Wen CE, 'Plastic deformation in the annealed Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under indenter', Journal of Alloys and Compounds,
doi:10.1016/j.jallcom.2008.07.088.
Xie HW, Lin JG, Li YC, Yan WY, Hodgson PD, Wen CE, 'Plastic deformation in Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass under Vickers indenter', Journal of Alloys and Compounds, 461(1-2), 173-177, 2008.
Xie ZH, Hoffman M, Munroe P, Bendavid A, Martin PJ, 'Deformation Mechanisms of TiN Multilayer Coatings Alternated by Ductile or Stiff Interlayers', Acta Materialia, 56(4), 852-861, 2008.
Xie ZH, Mahoney EK, Kilpatrick NM, Swain MV, Munroe P, Hoffman M, 'Transmission Electron Microscope Characterisation of Molar-Incisor-Hypomineralisation', Journal of Materials Science: Materials in Medicine, 19, 3187-3192, 2008.
Xie ZH, Swain MV, Munroe P, Hoffman M, 'On the critical parameters that regulate the deformation behaviour of tooth enamel', Biomaterials, 29(17), 2697-2703, 2008.
Xu W, Wu X, Sadedin D, Wellwood D, Xia K, 'Ultrafine-Grained Titanium of High Interstitial Contents with a Good Combination of Strength and Ductility', Applied Physics Letters, 92, 011924, 2008.
Yamada Y, Banno T, Li Y, Wen CE, 'Anisotropic Mechanical Properties of Nickel Foams Fabricated by Powder Metallurgy', Materials Science Forum, 569, 277-280, 2008.
Yan W, Sun Q, Hodgson PD, 'Determination of Plastic Yield Stress from Spherical Indentation Slope Curve', Materials Letters, 62(15), 2260-2262, 2008.
Yang C, Hodgson PD, Liu Q, Ye L, 'Geometrical Effects on Residual Stresses in 7050-T7451 Aluminium Alloy Rods Subject to Laser Shock Peening', Journal of Materials Processing Technology, 201(1-3), 303-309, 2008.
Yang C, Sabirov I, Mullins J, Hodgson PD, 'Analytic Prediction of Structural Stress-strain Relationsof Microstructured Metal', Advanced Materials Research, 32, 83-86, 2008.
Yao X, Dargusch MS, Dahle AK, Davidson CJ, StJohn DH, 'Investigation into the effect of nucleation parameters on grain formation during solidification using a cellular automaton-finite control volume method', Journal of Materials Research, 23(9), 2312-2325,2008.
Yao X, McDonald SD, Dahle AK, Davidson CJ, StJohn DH, 'Modelling of grain refinement: Part I. Effect of the solute titanium for aluminium', Journal of Materials Research, 23(5), 1282-1291, 2008.
Yao X, McDonald SD, Dahle AK, Davidson CJ, StJohn DH, 'Modelling of grain refinement: Part II. Effect of nucleant particles-TiB2 additions for aluminium', Journal of Materials Research, 23(5), 1292-1300, 2008.
Yao X, McDonald SD, Dahle AK, Davidson CJ, StJohn DH, 'Modelling of grain refinement: Part III. Al-7Si-0.3Mg aluminium alloy’, Journal of Materials Research, 23(5), 1301-1306, 2008.
Zatsepin NA, Dilanian RA, Nikulin AY, Gable BM, Muddle BC, Sakata O, ‘Early detection of nanoparticle growth from x-ray reciprocal space mapping’, Applied Physics Letters, 92(3), 034101-1-3, 2008.
Zhang M, Chen S, Ren H, Kelly P, 'Crystallography of the Simple HCP/FCC System', Metallurgical and Materials Transactions A, 39A, 1077-1086, 2008.
Zhang M, Qiu D, Kelly P, 'Crystallography of TiSi2 (C54) Epitaxy on (111)Si and (001)Si Surfaces', Thin Solid Films, 516, 5498-5502, 2008.
Zhang M, Shi Y, Sun H, Kelly P, 'Surface Alloying of Mg Alloys after Surface Nanocrystallization', Journal of Nanoscience and Nanotechnology, 8, 2724-2728, 2008.
Zhao MC, Liu M, Song G, Atrens A, 'Influence of Homogenization Annealing of AZ91 on Mechanical Properties and Corrosion Behavior', Advanced Engineering Materials, 10, 93-103, 2008.
Zhao MC, Liu M, Song G, Atrens A, 'Influence of microstructure on corrosion of as-cast ZE41', Advanced Engineering Materials, 10, 104-111, 2008.
Zhao MC, Liu M, Song G, Atrens A, 'Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41', Corrosion Science, 50, 3168-3178, 2008.
Zhao MC, Liu M, Song G, Atrens A, 'Influence of the β-phase Morphology on the Corrosion of the Mg Alloy AZ91', Corrosion Science, 50, 1939-1953, 2008.
Zhu H, Zhang X, Couper MJ, Dahle AK, 'Effect of Primary Intermetallic Particles on Surface Microstructure and Appearance of Aluminium Extrusions', Materials Chemistry and Physics, doi:10.1016/j.matchemphys.2008.07.109, in press.
Zhu SM, Mordike BL, Nie JF, 'Comparison of Creep Properties of a Mg-Al-Ca Alloy Produced by Different Casting Technologies', Materials Science and Engineering A, 483-484, 583-586, 2008.
Zhu YM, Morton AJ, Nie JF, 'Improvement in the Age Hardening Response of Mg-Y-Zn Alloys by Ag Additions', Scripta Materialia, 58, 525-528, 2008.