Ardelean H, Frateur I, Zanna S, Atrens A & Marcus P, 'Corrosion protection of AZ91 magnesium alloy by anodizing in niobium & zirconium-containing electrolytes', Corrosion Science, vol 51, pp 3030-3038, 2009.
Barnett MR, Ghaderi A, Sabirov I & Hutchinson B, 'Role of grain boundary sliding in the anisotropy of magnesium alloys', Scripta Materialia, vol 61(3), pp 277-280, 2009.
Barnett MR, Stanford N, Cizek P, Beer A, Xuebin Z & Keshavarz Z, 'Deformation mechanisms in Mg alloys & the challenge of extending room-temperature plasticity, JOM, vol 61(8), pp 19-24, 2009.
Beer AG & Barnett MR, 'The post-deformation recrystallization behaviour of magnesium alloy Mg-3Al-1Zn', Scripta Materialia, vol 61, pp 1097-1100, 2009.
Bettles CJ, Gibson MA, Stevenson AW, Tomus D & Lynch PA, 'In-situ observation of strain evolution in CP-Ti during uniaxial tensile loading', Nuclear Instruments & Methods in Physics Research Section A, DOI:10.1016/j.nima.2009.10.081, in press.
Bettles CJ, Moss MH & Lapovok R, 'A Mg-Al-Nd alloy produced via a powder metallurgical route', Materials Science Engineering A, vol 515(1-2), pp 26-31, 2009.
Bettles CJ, Puehringer T, Morton AJ, Tomus D & Gibson MA, 'The effect of Fe additions on the microstructure & mechanical properties of a Ti-Al-Mn alloy', International Journal of Modern Physics B, vol 23(6-7), pp 783-789, 2009.
Birbilis N, Easton M, Sudhloz AD, Zhu S & Gibson MA, 'On the corrosion of binary magnesium-rare earth alloys', Corrosion Science, vol 51, pp 683–689, 2009.
Birbilis N, Meyer K, Muddle BC & Lynch SP, 'In situ measurement of corrosion on the nanoscale', Corrosion Science, vol 51, vol 1569–1572, 2009.
Birbilis N, Ralston KD, Virtanen S, Fraser HL & Davies CHJ, 'Grain character influences on corrosion of ECAPed pure magnesium', Corrosion Engineering, Science & Technology,
DOI:10.1179/147842209X12559428167805, in press.
Boehlke T, Bondar G, Estrin Y & Lebyodkin MA, 'Geometrically non-linear modeling of the Portevin-Le Chatelier effect', Computational Materials Science, vol 44, pp 1076–1088, 2009.
Borrero-López O, Hoffman M, Bendavid A & Martin PJ, 'Reverse size effect in the fracture strength of brittle thin films', Scripta Materialia, vol 60, pp 937–940, 2009.
Borrero-López O, Vodenitcharova T, Hoffman M & Leo AJ, 'Fracture strength of polycrystalline silicon wafers for the photovoltaic industry', Journal of the American Ceramic Society, vol 92(11), pp 2713-2717, 2009.
Bouaziz O, Estrin Y & Kim HS, 'A new technique for severe plastic deformation: The Cone–Cone method', Advanced Engineering Materials, vol 11, pp 982-985, 2009.
Burgess T & Ferry M, 'Nanoindentation of metallic glasses', Materials Today, vol 12(1-2), pp 24-32, 2009.
Cavanaugh MK, Birbilis N, Buchheit RG, 'A quantitative study on the effects of environment & microstructure on pit initiation in Al-alloys, ECS Transactions, vol 16 (52), pp 1-11, 2009.
Cavanaugh MK, Buchheit RG & Birbilis N, 'Evaluation of a simple microstructural-electrochemical model for corrosion damage accumulation in microstructurally complex aluminum alloys', Engineering Fracture Mechanics, vol 76, pp 641–650, 2009.
Chia TL, Easton MA, Zhu SM, Gibson MA, Birbilis N & Nie JF, 'The effect of alloy composition on the microstructure & tensile properties of binary Mg- Earth alloys', Intermetallics, vol 17, pp 481–490, 2009.
Cole IS, Azmat NS, Kanta A & Venkatraman M, ‘What really controls the atmospheric corrosion of zinc? Effect of marine aerosols on atmospheric corrosion of zinc’, International Materials Reviews, vol 54(3), pp 117-133, 2009.
Da Costa Teixeira J, Bourgeois L, Sinclair CW & Hutchinson CR, 'The effect of plate-shaped, shear-resistant precipitates on the work hardening on aluminium alloys; towards a prediction of the strength-elongation combination', Acta Materialia, vol 57, pp 6075-6089, 2009.
Dayal P, Savvides N & Hoffman M, 'Characterisation of nanolayered aluminium/palladium thin films using nanoindentation', Thin Solid Films, vol 517(13), pp 3698-3703, 2009.
Divinski SV, Ribbe J, Baither D, Schmitz G, Reglitz G, Rosner H, Sato K, Estrin Y & Wilde G, 'Nano- & micro-scale free volume in ultrafine grained Cu-1 wt.%Pb alloy deformed by equal channel angular pressing', Acta Materialia, vol 57, pp 5706-5717, 2009.
Divinski SV, Ribbe J, Reglitz G, Estrin Y & Wilde G, 'Percolating network of ultrafast transport channels in severely deformed nanocrystalline metals', Journal of Applied Physics, vol 106, pp 063502, 2009.
Dobatkin S, Estrin Y, Zakharov V, Rostova T, Ukolova O & Chirkova A, 'Improvement in the strength & ductility of Al–Mg–Mn alloys with Zr & Sc additions by equal channel angular
pressing', International Journal of Materials Research, vol 100, pp 1697-1704, 2009.
Estrin Y & Vinogradov A, 'Fatigue behaviour of light alloys with ultrafine grain structure produced by severe plastic deformation: an overview', International Journal of Fatigue, DOI:10.1016/j.ijfatigue.2009.06.022, in press.
Estrin Y, Fomenko V, Grigorova T, Isaev N, Pustovalov V, Shumilin S & Janecek M, 'The effect of the superconducting transition on plastic deformation of ultrafine-grained aluminum', Advanced Engineering Materials, vol 11, pp 9-15, 2009.
Estrin Y, Isaev NV, Grigorova TV, Pustovalov VV, Fomenko VS & Shumilin SE, 'The plastic deformation of ultrafine grained aluminum at 0.52 K', Crystallography Reports, vol 54, pp 1097-1104, 2009.
Ferragut R, Liddicoat PV, Liao XZ, Zhao YH, Lavernia EJ, Valiev RZ, Dupasquier A & Ringer SP, ‘Chemistry of grain boundary environments in nanocrystalline Al 7075’, Journal of Alloys & Compounds, DOI:10.1016/j.jallcom.2009.10.104, in press.
Gao X, Muddle BC & Nie JF, ‘Transmission electron microscopy of Zr-Zn precipitate rods in magnesium alloys containing Zr & Zn’, Philosophical Magazine Letters, vol 89(1), pp 33-43, 2009.
Goussous S, Xu W, Wu X & Xia K, 'Al-C nanocomposites consolidated by back pressure equal channel angular pressing', Composites Science & Technology, vol 69, pp 1997-2001, 2009.
Hilditch T, Atwell D, Easton M & Barnett M, 'Performance of wrought aluminium & magnesium alloy tubes in three-point bending', Materials & Design, vol 30, pp 2316-2322, 2009.
Hutchinson B, Barnett MR, Ghaderi A, Cizek P & Sabirov I, 'Deformation modes & anisotropy in magnesium alloy', International Journal of Materials Research, vol 100(4), pp 556-563, 2009.
Hutchinson CR, Loo PT, Bastow TJ, Hill AJ & da Costa Teixeira J, 'Quantifying the strain-induced dissolution of precipitates in Al alloy microstructures using nuclear magnetic resonance’, Acta Materialia, vol 57, pp 5645-5653, 2009.
Idris MI, Vodenitcharova T & Hoffman M, 'Mechanical behaviour & energy absorption of closed–cell aluminium foam panels in uniaxial compression', Materials Science & Engineering A, vol 517(1-2), pp 37-45, 2009.
Jiang B, Qiu D, Zhang M-X, Ding P-D & Gao L, 'A new approach to grain refinement of an Mg-Li-Al cast alloy', Journal of Alloys & Compounds, DOI:10.1016/j.jallcom.2009.11.066, in press.
Kabir KR, Vodenitcharova T & Hoffman M, 'Structural response of aluminium foam hybrid s&wich panels under three-point bending loading', International Journal of Modern Physics B, vol 23(6-7), pp 1733-1738, 2009.
Kang F, Liu JQ, Wang JT, Zhao X, Wu X & Xia K, 'The effect of back pressure on mechanical properties of a Mg-3Al-1Zn alloy with single pass equal channel angular pressing', International Journal of Materials Research, vol 100, pp 1686-1690, 2009.
Kang M-K, Zhang M-X, Liu F & Zhu M, 'Overall activation energy of isothermal transformation in alloys & its mechanism (Part I)', Acta Metallurgica Sinica, vol 45(1), pp 25-31, 2009.
Kang M-K, Zhang M-X, Liu F & Zhu M, 'Overall activation energy of isothermal transformation in alloys & its mechanism (Part II)', Acta Metallurgica Sinica, vol 45(1), pp 32-38, 2009.
Kashyap BP, Hodgson PD, Estrin Y, Timokhina I, Barnett MR & Sabirov I, 'Plastic flow properties & microstructural evolution in an ultra-fine grained Al-Mg-Si alloy at elevated temperatures', Metallurgical & Materials Transactions, vol 40A, pp 3294-3303, 2009.
Kemal I, Whittle A, Vodenitcherova T, Burford R & Hoffman M, 'Toughening of unmodified polyvinylchloride through the addition of nanoparticulate calcium carbonate', Polymer, vol 50, pp 4066-4079, 2009.
Kuznetsov AY, Machado R, Gomes LS, Achete CA, Swamy V, Muddle BC & Prakapenka W, 'Size-dependence of rutile TiO2 lattice parameters determined via simultaneous size, strain & shape modelling', Applied Physics Letters, vol 94, pp 193117, 2009.
Lapovok R & Hodgson PD, 'A damage accumulation model for complex strain-paths: prediction of ductile failure in metals', Journal of the Mechanics & Physics of Solids, vol 57(11), pp 1851-1864, 2009.
Lapovok R, Tomus D, Barrnett MR & Gibson M, 'Use of residual hydrogen to produce CP-Ti powder compacts for low temperature rolling', International Journal of Materials Research, vol 12, pp 1727-1738, 2009.
Lapovok R, Tomus D, Mang J, Estrin Y & Lowe TC, 'Evolution of nanoscale porosity during Equal Channel Angular Pressing of Titanium', Acta Materialia, vol 57, pp 2909-2918, 2009.
Lapovok R, Tomus D, Skripnyuk VM, Barnett MR & Gibson MA, 'The effect of hydrogenation on the ECAP compaction of Ti-6Al-4V powder & the mechanical properties of compacts', Materials Science & Engineering A, vol 513-514, pp 97-108, 2009.
Lapovok R, Tóth LS, Winkler M & Semiatin SL, 'A comparison of continuous SPD processes for improving the mechanical properties of aluminum alloy 6111', Journal of Materials Research, vol 24(2), pp 459-469, 2009.
Lapovok R, Williams T & Estrin Y, 'Superplastic failure mode in ultrafine grained magnesium alloy', International Journal of Materials Research, vol 100(4), pp 609-613, 2009.
Laws KJ, Gun B & Ferry M, 'Influence of casting parameters on the critical casting size of bulk metallic glass', Metallurgical & Materials Transactions A, vol 40A, pp 2377-2387, 2009.
Lebyodkin MA, Lebedkina TA, Chmelík F, Lamark TT, Estrin Y, Fressengeas C & Weiss J, 'The intrinsic structure of acoustic emission events during jerky plastic flow', Physical Review B, vol 79, pp 174114, 2009.
Li JF, Birbilis N, Li CX, Jia, ZQ, Cai B & Zheng ZQ, 'Influence of retrogression temperature & time on the mechanical properties & exfoliation corrosion behavior of aluminium alloy AA7150', Materials Characterization, vol 60(11), pp 1334-1341, 2009.
Li JF, Jia ZQ, Li CX, Birbilis N & Cai C, 'Exfoliation corrosion of 7150 Al alloy with various tempers & its electrochemical impedance spectroscopy in EXCO solution', Materials & Corrosion, vol 60(6), pp 407-414, 2009.
Liss KD, Whitfield RE, Xu W, Buslaps T, Yeoh LA, Wu XL, Zhang DL & Xia K, 'In situ synchrotron high-energy X-ray diffraction analysis on phase transformation in Ti-Al alloys processed by equal-channel angular pressing', Journal of Synchrotron Radiation, vol 16, pp 825-834, 2009.
Liu M, Zanna S, Ardelean H, Frateur I, Schmutz P, Song G, Atrens A & Marcus P, 'A first quantitative XPS study of the surface films formed, by exposure to water, on Mg & on the Mg-Al intermetallics: Al3Mg2 & Mg17Al12', Corrosion Science, vol 51(5), pp 1115-1127, 2009.
Liu ZY, Kent D & Schaffer GB, 'Powder injection moulding of an Al-AlN metal matrix composite', Materials Science & Engineering A, vol 513-514, pp 352-356, 2009.
Lynch PA, Tomus D, Bettles CJ, Gibson MA & Stevenson AW, 'A comparative EBSD & micro-XRD study of the intergranular grain structure in CP-Ti', Nuclear Instruments & Methods in Physics Research Section A, DOI:10.1016/j.nima.2009.12.005, in press.
Matsutani A, Luo Z, Imlao S, Hoffman M & Pezzotti G, 'Visualization of highly graded oxygen vacancy profiles in PZT by spectrally resolved cathodoluminescence spectroscopy', Applied Physics Letters, vol 95, pp 202903, 2009.
McCabe RJ, Proust G, Cerreta EK & Misra A, 'Quantitative analysis of deformation twinning in zirconium', International Journal of Plasticity, vol 25, pp 454–472, 2009.
Mohseni H, Keirs S, Chan SLI & Ferry M, 'Thermal stability of fine-grained 7075Al composite containing nanosized SiC particles', Materials Science & Technology, 2009, in press.
Moon R, Hoffman M, Roedel J, Tochino S & Pezzotti G, 'Evaluation of crack-tip stress fields on microstructural-scale fracture in Al-Al2O3 interpenetrating network composites', Acta Materialia, vol 57, pp 570–581, 2009.
Nagasekhar AV, Easton MA & Cáceres CH, 'Solute content & the grain microstructure of high pressure die cast magnesium-aluminium alloys', Advanced Engineering Materials, vol 11, pp 912-919, 2009.
Nagasekhar AV, Rajkumar T, Dominik S, Tick-Hon Y & Guduru RK, 'Microstructure & mechanical properties of pure gold processed by equal channel angular pressing', Materials Science & Engineering A, vol 524, pp 204-207, 2009.
Nagasekhar AV, Yoon SC, Tick-Hon Y & Kim HS, 'An experimental verification of the finite element modelling of equal channel angular pressing', Computational Materials Science, vol 46, pp 347-35, 2009.
Pojprapai (Imlao) S , Russell J, Man H, Jones J, Daniels J & Hoffman M, 'Frequency effects on fatigue crack growth & crack tip domain switching behaviour in a lead zirconate titantate ceramic', Acta Materialia, vol 57, pp 3932–3940, 2009.
Proust G, Tomé CN, Jain A & Agnew SR, 'Modeling the effect of twinning & detwinning during strain-path changes of magnesium alloy AZ31', International Journal of Plasticity, vol 25, pp 861–880, 2009.
Qian M & Ma J, 'Heterogeneous nucleation on convex spherical surfaces: A rigorous thermodynamic formulation of Fletcher’s classical model & the new perspectives derived', Journal of Chemical Physics, vol 130, pp 214709, 2009.
Qian M, Cao P, Easton M, McDonald SD & St John DH, ‘An analytical model for constitutional supercooling driven grain formation & grain size prediction’, Acta Materialia, 2009, in press.
Qian M, Hildebr& ZCG & StJohn DH, 'The loss of dissolved zirconium in zirconium-refined magnesium alloys after remelting', Metallurgical & Materials Transactions A, vol 40, pp 2470-2479, 2009.
Qiu D & Zhang M-X, 'Effect of active heterogeneous nucleation particles on the grain refining efficiency in an Mg-10 wt.% Y cast alloy', Journal of Alloys & Compounds, vol 488, pp 260-264, 2009.
Qiu D, Kelly PM & Zhang M-X, 'The interfacial structure of self-assembled DySi2 nanostructures grown on Si(0 0 1)', Scripta Materialia, vol 60, pp 787-790, 2009.
Qiu D, Zhang M-X & Kelly PM, 'Crystallography of heterogeneous nucleation of Mg grains on Al2Y nucleation particles in an Mg-10wt.% Y alloy', Scripta Materialia, vol 61, pp 312-315, 2009.
Qiu D, Zhang M-X & Kelly PM, 'Crystallography of self-assembled DySi2 nanowires on a Si substrate', Applied Physic Letters, vol 94(8), pp 083105, 2009.
Qiu D, Zhang M-X, Taylor JA & Kelly PM, 'A new approach to design grain refiner for Mg casting alloys & the practice in Mg-Y based alloy', Acta Materialia, vol 57, pp 3052-3059, 2009.
Quadir MZ, Al-Buhamad O, Lau KD, Quarfoth R, Bassman L, Munroe PR & Ferry M, 'The effect of initial microstructure & processing temperature on microstructure & texture in multilayered Al-Al(Sc) ARB sheets', International Journal of Materials Research, vol 12, pp 1705-1714, 2009.
Quadir MZ, Ferry M, Al-Buhamad O & Munroe PR, 'Shear b&ing & recrystallization texture development in a multilayered Al alloy sheet produced by accumulative roll bonding', Acta Materialia, vol 57, pp 29-40, 2009.
Quirk SE, Birbilis N, Cavanaugh MK, Hutchinson CR, da Costa Teixeira J & Ringer SP, 'Corrosion of a new class of solid solution Al alloys', ECS Transactions, vol 16(32), pp 73-80, 2009.
Robertson IM & Schaffer GB, 'A review of densification of mixed elemental titanium-based powders in press-&-sinter processing', Powder Metallurgy, 2009, in press.
Robertson IM & Schaffer GB, 'Design of titanium alloy for efficient sintering to low porosity', Powder Metallurgy, vol 52, pp 311-315, 2009.
Robertson IM & Schaffer GB, 'Effect of residual pressure on vacuum sintering of Ti-Ni alloys', Powder Metallurgy, vol 52, pp 316-321, 2009.
Robertson IM & Schaffer GB, 'Some effects of particle size on the sintering of titanium & a master sintering curve model', Metallurgical & Materials Transactions A, vol 40, pp 1968-1979, 2009.
Robin L, Laws KJ, Xu W, Kurniawan G, Privat K & Ferry M, 'The three-dimensional structure of Mg-rich plates in as-cast Mg-based bulk metallic glass composites', Metallurgical & Materials Transactions A, DOI:10.1007/s11661-009-9989-8, in press.
Rosalie JM, Bourgeois LN & Muddle BC, 'Precipitate assemblies formed on dislocation loops in aluminium-silver-copper alloys', Philosophical Magazine, vol 89(15), pp 1267-78, 2009.
Sabirov I, Barnett MR, Estrin Y & Hodgson PD, 'The effect of strain rate on the deformation mechanisms & the strain rate sensitivity of an ultra-fine-grained Al alloy', Scripta Materialia, vol 61, pp 181-184, 2009.
Sabirov I, Barnett MR, Estrin Y, Timokhina I & Hodgson PD, 'Deformation mechanisms in an ultra-fine grained Al alloy', International Journal of Materials Research, vol 100, pp 1679-1685, 2009.
Samat N, Burford R, Whittle A & Hoffman M, 'The effects of frequency on fatigue threshold & crack propagation rate in modified & unmodified polyvinyl chloride', Polymer Engineering & Science, vol 49(7), pp 1299-1310, 2009.
Schaare S, Riehemann W & Estrin Y, 'Damping properties of an assembly of topologically interlocked cubes', Materials Science Engineering A, vol 521-522, pp 380-383, 2009.
Seyeux A, Liu M, Schmutz P, Song G, Atrens A & Marcus P, 'ToF-SIMS depth profile of the surface film on pure magnesium formed by immersion in pure water & the identification of magnesium hydride', Corrosion Science, vol 51, pp 1883-1886, 2009.
Sha G, Ringer SP, Duan ZC & Langdon TG, ‘An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing’, International Journal of Materials Research, vol 100, pp 1674–1678, 2009.
Sha G, Wang YB, Liao XZ, Duan ZC, Ringer SP & Langdon TG, ‘Influence of equal-channel angular pressing on precipitation in an Al–Zn–Mg–Cu alloy’, Acta Materialia, vol 57, pp 3123–3132, 2009.
Shen L & Chen Z, 'A numerical study of the imperfection effect on ultrananocrystalline diamond properties under different loading paths & temperatures', Composites Science & Technology, vol 69(13), pp 2075-2080, 2009.
Shen L & Chen Z, 'A study of mechanical properties of pure & nitrogen-doped ultrananocrystalline diamond films under various loading conditions', International Journal of Solids & Structures, vol 46(3-4), pp 811-823, 2009.
Shen L & Chen Z, 'An investigation of combined size, rate & thermal effects on the material properties of single crystal diamond', International Journal of Materials & Product Technology, vol 34(1/2), pp 111-130, 2009.
Shen L & Chen Z, 'Loading history effect on size-dependent shear strength of pure & nitrogen-doped ultrananocrystalline diamond', Mechanics of Advanced Materials & Structures, vol 16(7), pp 504 – 515, 2009.
Shen L & Chen Z, 'Molecular dynamics study of the specimen size & imperfection effects on the failure responses of multi-nanobar structures’, International Journal for Multiscale Computational Engineering, 2009, in press.
Skripnyuk VM, Rabkin E, Estrin Y & Lapovok R, 'Improving hydrogen storage properties of magnesium based alloys by equal channel angular pressing', International Journal of Hydrogen Energy, vol 34(15), pp 6320-6324, 2009.
Spencer K & Zhang M-X, 'Heat treatment of cold spray coatings to form protective intermetallic layers', Scripta Materialia, vol 61, pp 44-47, 2009.
Spencer K & Zhang M-X, 'The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment', Surface & Coatings Technology, vol 203, pp 3019-3025, 2009.
Spencer K, Fabijanic DM & Zhang M-X, 'The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys', Surface & Coatings Technology, vol 204, pp 336-344, 2009.
Stanford N & Barnett MR, 'Effect of particles on the formation of deformation twins in a magnesium-based alloy', Materials Science & Engineering A, vol 516(1-2), pp 226-234, 2009.
Stanford N, Sabirov I, Sha G, La Fontaine A, Barnett MR & Ringer SP, 'Effect of Al & Gd solutes on the strain rate sensitivity of magnesium alloys', Metallurgical & Materials Transactions A, DOI:10-1007/s11661-009-0107-8, in press.
Stanford N, Sha G, La Fontaine A, Barnett MR & Ringer SP, 'Atom probe tomography of solute distributions in mg-based alloys', Metallurgical & Materials Transactions A, vol 40A(10), pp 2480-2487, 2009.
Sun HQ, Shi YN & Zhang M-X, 'Sliding wear-induced microstructure evolution of nanocrystalline & coarse grained AZ91D Mg alloy', Wear, vol 266, pp 666-670, 2009.
Sun Y, Zhang HF, Wang AM, Fu HM, Hu ZQ, Wen CE & Hodgson PD, 'Mg-based metallic glass/titanium interpenetrating phase composite with high mechanical performance', Applied Physics Letters, vol 95, pp 171910, 2009.
Toth LS, Lapovok R, Hasani A & Gu C, 'Non-equal channel pressing of aluminium alloy', Scripta Materialia, vol 61(12), pp 1121-1124, 2009.
Truong VK, Rundell S, Lapovok R, Estrin Y, Wang JY, Berndt CC, Barnes DG, Fluke CJ, Crawford RJ & Ivanova EP, 'Effect of ultrafine-grained titanium surfaces on adhesion of bacteria', Applied Microbiology & Biotechnology, vol 83, pp 925–937, 2009.
Valiev RZ, Xia K & Langdon TG, 'Processing by severe plastic deformation: an ancient skill adapted for the modern world', International Journal of Materials Research, vol 100, pp 1623-1630, 2009.
Wang Q, Praud M, Needleman A, Kim K, Griffiths JR, Davidson CJ, Cáceres CH & Benzerga AA, 'Size effects in aluminium alloy castings', Acta Materialia, 2009, accepted.
Xie HW, Li YC, Liao SZ, Hodgson PD & Wen CE, 'Plastic deformation in a partially crystallized Zr-based BMG under Vickers indenter', Journal of Alloys & Compounds, vol 484, pp 886–890, 2009.
Xie ZH, Swadener G, Swain MV, Munroe P & Hoffman M, 'Effect of microstructure upon elastic behaviour of human tooth enamel', Journal of Biomechanics, vol 42(8), pp 1075-1080, 2009.
Xie ZH, Swain MV & Hoffman M, 'Structural integrity of enamel: a combined indentation, electron microscopy & modelling study', Journal of Dental Research, vol 88(6), pp 529-533, 2009.
Xu C, Xia K & Langdon TG, 'Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure', Materials Science Engineering A, vol 527, pp 205-211, 2009.
Xu W, Wu X, Calin M, Stoica M, Eckert J & Xia K, 'Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability', Scripta Materialia, vol 60, pp 1012-1015, 2009.
Xu W, Wu X, Figueiredo RB, Stoica M, Calin M, Eckert J, Langdon TG & Xia K, 'Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion', International Journal of Materials Research, vol 100, pp 1662-1667, 2009.
Xu W, Wu X, Honma T, Ringer SP & Xia K, ‘Nanostructured Al-Al2O3 composite formed in situ during consolidation of ultrafine Al particles by back pressure equal channel angular pressing’, Acta Materialia, vol 57, pp 4321–4330, 2009.
Yang D, Hodgson P & Wen C, 'The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding', Intermetallics, vol 17, pp 727-732, 2009
Yang D, Xiong J, Hodgson P & Wen C, 'Influence of deformation-Induced heating on the bond strength of rolled metal multilayers', Materials Letters, vol 63, pp 2300-2302, 2009
Yoon SC, Nagasekhar AV & Kim HS, 'Finite element analysis of bending behavior of the workpiece in equal channel angular pressing', Metals & Materials International, vol 15(2), pp 215-219, 2009.
Yoon SC, Nagasekhar AV, Kang S-Y & Kim HS, 'Plastic deformation analysis of Accumulative Back Extrusion', International Journal of Materials Research, vol 100(12), pp 1715-1719, 2009.
Yu P & Schaffer GB, 'Microstructural evolution during pressureless infiltration of aluminum alloy parts fabricated by selective laser sintering', Acta Materialia, vol 57, pp 163-170, 2009.
Zhang M-X, Hirmke J, Spencer K, Sun H-Q, Shi Y-N & Shi Z, 'Surface treatment of cast AZ91 alloy', Die Casting Engineers, November, pp 31-35, 2009.
Zhang M-X, Huang H, Spencer K & Shi Y-N, 'Nanomechanics of Mg-Al intermetallic compounds', Surface & Coatings Technology, DOI:10.1016/j.surfcoat.2009.11.031, in press.
Zhao MC, Schmutz P, Brunner S, Liu M, Song G & Atrens A, 'An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing', Corrosion Science, vol 51, pp 1277-1292, 2009.
Zhu YM, Weyl& M, Morton AJ, Oh-ishi K, Hono K & Nie JF, 'The building block of long-period structures in Mg-RE-Zn alloys', Scripta Materialia, vol 60, pp 980-983, 2009.