| AfrinZinnia, Nasima |
|
M. Ferry |
|
Development of 3D-EBSD and its application in the study of solid-state transformations in crystalline materials |
|
2009 |
|
The University of New South Wales |
| Al-Goussous, Shouqie |
|
K. Xia |
|
BP-ECAC of aluminum based nanocomposites |
|
September 2007 |
|
The University of Melbourne |
| Al-Salihi, Huda |
|
C.J. Bettles, B.C. Muddle |
|
Die and mould production: Die extrusion behaviour of Ti alloy powder |
|
July 2009 |
|
Monash University |
| Cao, Yang (Jake) |
|
M. Ferry, K. Laws |
|
Bulk metallic glasses for biomedical applications |
|
February 2009 |
|
The University of New South Wales |
| Chen, Yu (Emily) |
|
C.R. Hutchinson |
|
Designing multiscale precipitates structures for Al alloys with enhanced strength, elongation and toughness |
|
November 2008 |
|
Monash University |
| Guo, Gregory (Wei) |
|
M. Ferry |
|
Processing and properties of multifunctional Ti-NB-O alloys |
|
February 2006 |
|
University of New South Wales |
| Hayazi, Nur Farhana |
|
S.L.I. Chan, A. Crosky |
|
Characterisation and sintering properties of titanium hydride powder |
|
July 2008 |
|
The University of New South Wales |
| Katsoulotos, S (nee Moutsos) |
|
B.C. Muddle & S.P. Lynch |
|
Ductile versus Brittle Facture Behaviour in Al-Li and other Aluminium Alloys |
|
February 2005 |
|
Monash University |
| Knop, Mark |
|
B.C. Muddle, S.P. Lynch |
|
Effects of cycle frequency and other variables on corrosion-fatique crack growth |
|
September 2009 |
|
Monash University |
| Lau, Kai Dick |
|
M. Ferry, Z. Quadir |
|
Accumulative roll bonding of commercial purity Al alloys |
|
2008 |
|
The University of New South Wales |
| Lim, Ju Beom |
|
B.C. Muddle, C.J. Bettles, Y. Estrin |
|
Effect of impurity levels on the consolidation of Ti Powder |
|
November 2008 |
|
Monash University |
| Liu, Ming |
|
A. Atrens, G. Song & P. Schmutz |
|
Corrosion mechanisms of magnesium alloys |
|
January 2007 |
|
University of Queensland |
| Low, Ray |
|
G. Schaffer & I. Robertson |
|
Sintering of Ti alloys |
|
Febuary 2007 |
|
University of Queensland |
| Lui, Edward |
|
K. Xia |
|
Consolidation of Ti-Al alloys by ECAP |
|
January 2008 |
|
The University of Melbourne |
| Molotnikov, Andrew |
|
R. Lapovok & Y. Estrin |
|
Microforming: Effect of microstructural scale on metal formability |
|
January 2006 |
|
Monash University |
| Moy, Charles |
|
G. Ranzi, S.P. Ringer |
|
Characterisation of the mechanical and structural material properties of hybrid metal composites |
|
March 2008 |
|
The University of Sydney |
| Shahzad, Nasia |
|
I. Cole, B.C. Muddle & A. Kanta |
|
High throughput experimentation to define variable space in light material degradation for multi-scale modelling |
|
March 2007 |
|
Monash University |
| Shamlaye, Karl |
|
M. Ferry, K. Laws |
|
Amorphous metallic alloys |
|
July 2009 |
|
The University of New South Wales |
| Shih, Jasmine |
|
B.C. Muddle, M. Weyland |
|
Precipitation in high-strength microalloyed Al-Cu-Li Alloys |
|
October 2008 |
|
Monash University |
| Südholz, Aaron Dale |
|
N. Birbilis & B.C. Muddle |
|
Development of corrosion resistant Mg alloys |
|
June 2007 |
|
Monash University |
| Sukiman, Nazatul |
|
N. Birbilis |
|
Development of corrosion resistant Al-alloys |
|
December 2009 |
|
Monash University |
| Tang, George |
|
M. Hoffman |
|
Cyclic fatigue crack growth in ultra fine grained aluminium |
|
2009 |
|
The University of New South Wales |
| Tawfeeq, Arwa |
|
M. Barnett |
|
The influence of welding and property gradients on advanced micro-truss structures |
|
2009 |
|
Deakin University |
| Thomas, Sebastian |
|
N. Birbilis |
|
Multiscale modeling of corrosion of self repairing oxides |
|
December 2009 |
|
Monash University |
| Wang, Qiang |
|
M.X. Zhang, N. Birbilis, K. Spencer |
|
A novel technique to produce composite coatings on metal substrates and composite billets through kinetic metallization |
|
December 2009 |
|
The University of Queensland |
| Wu, Yi Sun |
|
K. Xia |
|
|
|
October 2008 |
|
The University of Melbourne |
| Xu, Zhou |
|
J.F. Nie |
|
Effects of multiple ageing Treatment on the precipitate distribution and fracture toughness in Mg-Y-Nd Alloys |
|
March 2008 |
|
Monash University |
| Yang, Dengke |
|
C. Wen, P.D. Hodgson & M. Hoffman |
|
Preparation, characterisation and numerical models of nano-micro laminates |
|
October 2007 |
|
Deakin University |
| Yang, Kun |
|
C. Cáceres |
|
The origin of the yield strength in thin sections of Mg alloys produced by the high pressure die casting (hpdc) process |
|
January 2009 |
|
The University of Queensland |
| Yao, Yin |
|
S.L.I. Chan, M. Ferry |
|
Aluminium matrix composites |
|
February 2009 |
|
The University of New South Wales |
| Zhu, Yuman |
|
J.F. Nie & A. Morton |
|
Precipitation in Mg-Y-Zn Based Alloys |
|
March 2006 |
|
Monash University |
 |
|
|
|
|
|
|
|
|