|
|
| |
| |
|
|
| |
| |
|
| |
PS2-01
|
|
Solute Cluster and Precipitate Evolution in Early Ageing of Al-Zn-Mg |
|
Peter V Liddicoat, Tomoyuki Honma, Leigh T Stephenson & Simon P Ringer |
| |
PS2-02
|
|
The Effect of Particle Shape on the Sintering of Aluminium |
|
Zhenyun Liu, Tim B Sercombe & Graham B Schaffer |
| |
PS2-03
|
|
Anomalous porosity after liquid-phase sintering of titanium powders |
|
Ray Low |
| |
PS2-04
|
|
Modelling Mechanical Behaviour of Mg Alloys in Channel Die Compression Test |
|
Xiang Ma & Matthew R Barnett |
| |
PS2-05
|
|
Solute Clustering and Rapid Hardening During Ageing of Al-Cu-Mg Alloys |
|
Ross K W Marceau & Simon P Ringer |
| |
PS2-06
|
|
Novel Solid State Processing Route for the Development of Nanostructured Magnesium Alloys |
|
Matthew Moss, Colleen Bettles & Rimma Lapovok. |
| |
PS2-07
|
|
Mechanical Properties of High Pressure Die Cast Magnesium-Aluminium (Mg-Al) Alloys |
|
Anumalasetty V Nagasekhar & Carlos H Cáceres |
| |
PS2-08
|
|
Age-hardening of Beta-III metastable Ti- alloy |
|
Hoi Pang Ng, Colleen J Bettles & Barry C Muddle |
| |
PS2-09
|
|
SPring-8 micro-XRF analysis of strontium segregation in modified hypoeutectic Al-Si alloy |
|
Kazuhiro Nogita & Arne K Dahle |
| |
PS2-10
|
|
Multi-Layered Al/Al-Sc Composite Produced by Accumulative Roll Bonding |
|
M Zakaria Quadir, Oday Al-Buhamad & Michael Ferry |
| |
PS2-11
|
|
Mechanical Properties of Nanometric Particls Reinforced Aluminium Composites |
|
Zheng (Eric) Ren & Sammy Lap-Ip Chan |
| |
PS2-12
|
|
Sintering of Titanium Alloys studies using Dilatometry |
|
Ian Robertson |
| |
PS2-13
|
|
The morphology of the γ (AlAg2) phase arrays; the influence of defect structure |
|
Julian Rosalie |
| |
PS2-14
|
|
Influence of Temperature on the Springback Bbehaviour of Metal/Polymer-Laminates |
|
M. Weiss, B.F. Rolfe & P.D Hodgson |
| |
PS2-15
|
|
Synthesis of Bulk Materials from Particles by Back Pressure Equal Angular Consolidation (BP-ECAC) |
|
Xiaolin Wu, Wei Xu & Kenong Xia |
| |
PS2-16
|
|
Nanostructured Aluminium after Back Pressure Equal Channel Angular Consolidation and Deformation |
|
Xiaolin Wu, Wei Xu & Kenong Xia |
| |
PS2-17
|
|
Bulk Aluminium with Normal and Bimodal Grain Structures Synthesised using Back Pressure Equal Channel Angular Consolidation |
|
Xiaolin Wu, Wei Xu & Kenong Xia |
| |
PS2-18
|
|
Application of Back Pressure Equal Channel Angular Consolidation in Producing Aluminium Composites with Fine Flyash Particles |
|
Xiaolin Wu & Kenong Xia |
| |
PS2-19
|
|
Ultrafine Aluminium After Back Pressure Equal Channel Angular Consolidation and Deformation |
|
Xiaolin Wu, Kenong Xia, Tonoyuki Honma & Simon P Ringer |
| |
PS2-20
|
|
Effect of Ni content on the glass forming ability of Mg-Ni-Si alloys by mechanical alloying |
|
Haowen Xie, Jianguo Lin, Peter D Hodgson & Cui’e Wen |
| |
PS2-21
|
|
Mechanical property and energy absorption of aluminium foams under dynamic and quasi-static compression |
|
Jianyu Xiong, Yuncang Li, Mark Forrest, Peter D Hodgson & Cui’e Wen |
| |
PS2-22
|
|
Generating 3-D microstructures using FIB-EBSD Tomography |
|
Martin Xu, Michael Ferry, Julie M Cairney & F John Humphreys |
| |
PS2-23
|
|
Inhomogeneous deformation-induced grain refinement in metastable β-titanium alloys |
|
Wei Xu, Xiaolin Wu & Kenong Xia |
| |
PS2-24
|
|
A Novel Elastoplasticity Cap Model for Hydrogen-Softening metal alloy powders |
|
Chunhui Yang, Weimin Gao, Peter D Hodgson, Matthew Barnett & Pinaki Bhattacharjee |
| |
PS2-25
|
|
Fabrication and Properties of Titanium Matrix Composites Reinforced with Nanometric Particles |
|
Fei (Fred) Yuan & Sammy L I Chan |
| |
PS2-26
|
|
Surface Alloying of magnesium alloys after surface nanocrystallisation |
|
Ming-Xing Zhang, Yi-Nong Shi, Haiqing Sun & Patrick M Kelly |
| |
 |
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
