|
|
| |
| |
|
|
| |
| |
|
| |
PS2-01
|
|
Anisotropic mechanical properties of nickel foams fabricated by powder metallurgy |
|
Cui’e Wen, Y. Yamada, T. Banno, Yuncang Li & Matthew Barnett |
| |
PS2-02
|
|
Investigation of the interaction between tin and copper in aluminium-(copper-) tin alloys at elevated temperatures |
|
Gwenaël Bougaran & Laure Bourgeois |
| |
PS2-03
|
|
Surface alloying of aluminium alloys by diffusion coating |
|
Hai Wei Chang, Ming-Xing Zhang & Pat Kelly |
| |
PS2-04
|
|
Dislocation boundaries and disclinations formed within the cube grains during tensile deformation of aluminium |
|
Pavel Cizek |
| |
| PS2-05 |
|
The effect of solute and precipitates on the work hardening of Al-Cu based alloys: development of a quantitative description of the yield strength-elongation correlation |
|
Julien da Costa Teixeira, Christopher Hutchinson, Laure Bourgeois & Chad Sinclair |
| |
PS2-06
|
|
Dilatant shear bands in solidifying light alloys |
|
Chris M. Gourlay & Arne K. Dahle |
| |
PS2-07
|
|
Mechanical behaviour of Zr41Ti14Cu12.5Ni10Be22.5 bulk metal glass |
|
Haowen Xie, Jianguo Lin, Cui’e Wen and Peter Hodgson |
| |
| PS2-08 |
|
An experimental determination of solute-vacancy binding energies in high purity Al-0.1A (at.%) alloys |
|
Christopher Hutchinson, Brian Gable, Natalie Ciccosillo, P. H. Loo, Tim Bastow & Anita Hill |
| |
PS2-09
|
|
Contact damage resistance of sandwich panels reinforced by carbon fibre skins |
|
Maizlinda Idris, Tania Vodenitcharova & Mark Hoffman |
| |
PS2-10
|
|
Structural response of hybrid sandwich panels with aluminium foam core and thin aluminium face sheets under bending loading |
|
Kaveh Kabir, Tania Vodenitcharova and Mark Hoffman |
| |
PS2-11
|
|
Slip during tension testing of rolled Mg-3Al-1Zn |
|
Zohreh Keshavarz & Matthew Barnett |
| |
PS2-12
|
|
The Effect of Mechanical Preparation on the Electrochemistry of AA2024-T3 Alloy |
|
Arun Kumar & Barry Muddle |
| |
PS2-13
|
|
The production and elevated temperature properties of Ca65Mg15Zn20 bulk metallic glass |
|
Kevin Laws, Bulent Gun & Michael Ferry |
| |
PS2-14
|
|
Quench sensitivity of cast and wrought AlZnMgCu(Zr) aluminum alloys |
|
Shengdan Liu, Xinming Zhang, Sam Gao & Barry Muddle |
| |
PS2-15
|
|
The sintering of titanium with solid lubricants |
|
Ray Low, Ian Robertson & Graham Schaffer |
| |
| PS2-16 |
|
Novel solid state processing route for the development of magnesium alloys |
|
Matthew Moss, Colleen Bettles & Rimma Lapovok |
| |
PS2-17
|
|
Mechanical properties of aluminium composites reinforced by nanometric particulates |
|
Zheng Ren & Sammy Chan |
| |
PS2-18
|
|
A new strategy to improve ductility in ultra-fine grained materials |
|
Ilchat Sabirov, Yuri Estrin, Matthew Barnett, Ilana Timokhina & Peter Hodgson |
| |
PS2-19
|
|
Surface modification of magnesium using kinetic metallization |
|
Kevin Spencer & Ming-Xing Zhang |
| |
PS2-20
|
|
A combined approach to the investigation of the mechanical response of aluminium foam panels to localised contact damage |
|
Tania Vodenitcharova, Maizlinda Idris, Kaveh Kabir & Mark Hoffman |
| |
PS2-21
|
|
The study on the behaviours of nucleation and grain growth in deformed Ni and IF steel by 3-D FIB-EBSD tomography |
|
Wangiang Xu & Michael Ferry |
| |
| PS2-22 |
|
Towards the thermodynamic equilibrium of titanium aluminides after consolidation by back pressure equal channel angular pressing |
|
Wei Xu, Xiaolin Wu, R. Whitfield, K. D. Liss, T. Buslaps, L. A. Yeoh, D. L. Zhang & Kenong Xia |
| |
| PS2-23 |
|
High strength ultrafine/nano-structured aluminium materials produced by back pressure equal channel angular processing |
|
Wei Xu, Xiaolin Wu, Tomoyuki Honma, Simon Ringer & Kenong Xia |
| |
PS2-24
|
|
Properties of titanium matrix composites reinforced with titanium boride |
|
Fei Fred Yuan, Sammy Chan, Sam Moricca & Tina Eddowes |
| |
 |
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
