|
|
| |
| |
|
|
| |
| |
|
| |
PS1-01
|
|
Three dimensional characterization of pseudo-micro truss structures in high pressure die cast AZ91alloys |
|
Venkata Nagasekhar Anumalasetty & Carlos Cáceres |
| |
PS1-02
|
|
The Hall-Petch relationship in Mg-Zn solid solutions |
|
Carlos Cáceres , Gemma Mann & John Griffiths |
| |
PS1-03
|
|
Deformation modes and anisotropy in magnesium alloy AZ31 |
|
Pavel Cizek, Ilchat Sabirov, Alireza Ghaderi, Matthew Barnett & Bevis Hutchinson |
| |
PS1-04
|
|
Al-based ultrafine/nanostructured composites by back pressure equal channel angular consolidation |
|
Shouqie Zuhair Al-Goussous, Charlotte Froidevaux, Wei Xu & Kenong Xia |
| |
PS1-05
|
|
Microstructural study of interfacial region of cold sprayed Cu coating on light alloy substrates |
|
York Han, Nick Birbilis & Barry Muddle |
| |
PS1-06
|
|
Contact damage response of foam-based sandwich panels to quasi-static and impact indentation |
|
Maizlinda Idris, Tania Vodenitcharova & Mark Hoffman |
| |
PS1-07
|
|
Understanding the fracture behaviour of Al-Li alloys |
|
Stavroula Katsoulotos, Stan Lynch, Barry Muddle, Xiang-Yuan Xiong & Russell King |
| |
PS1-08
|
|
Electrochemical and AFM-SKPFM study of the chemical pretreatments to the surface of AA2024-T3 |
|
Arun Kumar, Adam Mechler, Lisa Martin & Barry Muddle |
| |
PS1-09
|
|
Prediction of metallic glass-forming compositions |
|
Kevin Laws, Karl Shamlae & Michael Ferry |
| |
PS1-10
|
|
APT characterisation of solute clustering in 6111 Al alloy |
|
Sha Li, Gang Sha, Ross Marceau & Simon Ringer |
| |
PS1-11
|
|
Novel grain boundary solute architecture in a nanostructured ultra high strength 7075 aluminium alloy |
|
Peter Liddicoat & Simon Ringer |
| |
PS1-12
|
|
Sintering of titanium powder compacts for containerless hot isostatic pressing |
|
Ray Low, Ian Robertson, Ma Qian & Graham Schaffer |
| |
PS1-13
|
|
Thermal impact on laboratory-scale samples during ageing at elevated temperature for a short duration |
|
Ross Marceau, Naomi Tsafnat & Simon Ringer |
| |
PS1-14
|
|
Application of inverse analysis simulation technique to characterise material properties using instrumented indentation experiments |
|
Charles Moy, Massimiliano Bocciarelli, Simon Ringer & Gianluca Ranzi |
| |
PS1-15
|
|
Interrogation of void-like objects in Al-Cu-Sn |
|
Philip Nakashima, Laure Bourgeois & Barry Muddle |
| |
PS1-16
|
|
Detwinning of hexagonal close-packed metals: Example of magnesium alloy AZ31 and pure zirconium |
|
Gwénaëlle Proust, Carlos Tomé, Irene Beyerlein, George Kaschner, Bjørn Clausen, Rodney McCabe & Sean Agnew |
| |
| PS1-17 |
|
Characterisation of the mechanical properties of multi-layered metallic systems by means of an inverse analysis technique |
|
Massimiliano Bocciarelli, Simon Ringer & Gianluca Ranzi |
| |
PS1-18
|
|
Mg - based bulk metallic glass composite |
|
Lalu Robin, Kevin Laws & Michael Ferry |
| |
PS1-19
|
|
Characterisation of stainless steel cold spray coatings on AZ91 Mg substrates |
|
Marc Schwartz, Kevin Spencer & Ming-Xing Zhang |
| |
PS1-20
|
|
First principles calculations of stacking faults for titanium |
|
Andrew Smith |
| |
PS1-21
|
|
The corrosion behaviour of HPDC Mg-RE alloys |
|
Aaron Südholz, Nick Birbilis, Mark Gibson & Mark Easton |
| |
PS1-22
|
|
The effect of hydrogenation on the compaction of Ti-6Al-4V powder |
|
Dacian Tomus, Rimma Lapovok, Vladimir Skripnyuk, Matthew Barnett & Mark Gibson |
| |
| PS1-23 |
|
Preparation of porous titanium-molybdenum alloy scaffold for implant material applications |
|
Cui’e Wen, Yuncan Li, Jianyu Xiong & Peter Hodgson |
| |
PS1-24
|
|
Consolidation of pure Mg particles into bulk materials by back pressure equal channel angular processing |
|
Xiaolin Wu, Wei Xu & Kenong Xia |
| |
PS1-25
|
|
Ultrafine-structure formation in metastable beta-titanium alloy via severe plastic deformation |
|
Wei Xu, Xiaolin Wu, Mariana Calin, Mihai Stoica, Jürgen Eckert & Kenong Xia |
| |
PS1-26
|
|
Investigation on structure and mechanical properties of multilayered Ti/Al laminate produced by accumulative roll bonding process |
|
Dengke Yang, Cui’e Wen & Peter Hodgson |
| |
PS1-27
|
|
Parameters optimization of fan-shaped AZ31 magnesium alloy in extrusion process |
|
Yan-dong Yu, Hai-xia Xi, Sam Gao & Barry Muddle |
| |
 |
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
